| Title: | VAX and Alpha VMS |
| Notice: | This is a new VMSnotes, please read note 2.1 |
| Moderator: | VAXAXP::BERNARDO |
| Created: | Wed Jan 22 1997 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 703 |
| Total number of notes: | 3722 |
Hi,
One of our customer had an intermaintent problem during backup, he
found hundred of errors on the scsi controller (PKA0).
Customer had:
Alpha 3000, OVMS/AXP V6.1
4 RZ26L disk drives
1 TLZ06 tape drive.
Had any one face a similer problem
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 334.1 | UTRTSC::utoras-198-48-146.uto.dec.com::JurVanDerBurg | Change mode to Panic! | Mon Mar 17 1997 14:45 | 8 | |
> Had any one face a similer problem Yeah, many times. First, check the errorlog for funny things, then check scsi cabling and termination, and do this VERY carefully. Many mistakes are made with that. Jur. | |||||
| 334.2 | Errorlog sample | EVOCDG::DECBAH::ZULFIQAR | Wed Mar 19 1997 10:32 | 84 | |
Thanks for your feedback,
We checked the error log, found many errors, one sample is delow
ERROR SEQUENCE 9129. LOGGED ON: CPU_TYPE
00000002
DATE/TIME 11-MAR-1997 01:28:11.72 SYS_TYPE
00000004
SYSTEM UPTIME: 13 DAYS 08:01:20
SCS NODE: KIA OpenVMS AXP
V6.1
HW_MODEL: 00000409 Hardware Model = 1033.
DEVICE ATTENTION DEC 3000 Model 500
TM32 SCSI PORT SUB-SYSTEM, KIA$PKA0:
ERROR TYPE 0008
UNEXPECTED INTERRUPT
SCSI ID 07
SCSI ID = 7.
SCSI CMD FE00000A
0000
SCSI MSG 00
COMMAND COMPLETE
SCSI STATUS FF
NO STATUS RECEIVED
PORT ERROR CNT 00000000
00000000
00000000
BUS BUSY CNT = 0.
UNSOL RESET CNT = 0.
UNSOL INTRPT CNT = 0.
CONN ERROR CNT 00000000
00000000
00000000
00000000
00000000
00000000
00000000
ARB FAIL CNT = 0.
SEL FAIL CNT = 0.
PARITY ERR CNT = 0.
PHASE ERR CNT = 0.
BUS RESET CNT = 0.
BUS ERROR CNT = 0.
CONTROLLER ERROR CNT = 0.
SCSI RETRY CNT 00000000
000E
ARB RETRY CNT = 0.
SEL RETRY CNT = 0.
BUSY RETRY CNT = 14.
PORT DEPENDENT DATA
TRANSFER CNT 0000
TRANSFER CNT = 0.
FIFO 00
CMD 42
STATUS 17
MESSAGE IN
TRANSFER CNT
INTERRUPT STS 00
SEQUENCE STEP 8B
SEQUENCE CODE = 3(X)
FIFO FLAGS 67
CONFIG1 17
PARITY CHECKING
CONFIG2 03
DMA PARITY ENABLE
REGISTER PARITY ENABLE
CONFIG3 04
SAVE RESIDUAL BYTE
DMA ADDRESS 00000280
IMER FFCCFFCC
SDIC 40679740
SAVED CIR 00040FF0
SAVED CMD 00000042
SAVED STATUS 97
SAVED FIFO FLGS 67
SAVED INT REG 40
******************************* ENTRY 4747.
*******************************
| |||||