T.R | Title | User | Personal Name | Date | Lines |
---|
240.1 | "88"?? | CSC32::D_DONOVAN | SummaNulla(The High Point of Nothing) | Mon Feb 24 1997 16:16 | 21 |
| My STARS Article doesn't seem to "know" about a "3100 Model 88"
however, here are some that are "close"...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[OpenVMS] CPU Operating System Versions and Release Dates Table & Flowchart
.
.
.
MicroVAX 3100 Model 30/40/80 V5.5 (see Note 22)
MicroVAX 3100 Model 85 V5.5-2H4 (see Note 27)
MicroVAX 3100 Model 90 V5.5-2HW (see Note 24/25)
MicroVAX 3100 Model 95 V5.5-2H4 (see Note 27)
MicroVAX 3100 Model 96 V5.5-2H4 (see Note 31)
MicroVAX 3100 Model 98 V5.5-2H4 (see Note 37)
.
.
.
|
240.2 | V5.5-2H4, with caveats | XDELTA::HOFFMAN | Steve, OpenVMS Engineering | Mon Feb 24 1997 17:20 | 9 |
|
The MicroVAX 3100 model 88 will boot under OpenVMS VAX V5.5-2H4. That
release does not "know" about the MicroVAX 3100 model 88, and will thus
mis-identify it. Other than this system mis-identification, yes, the
system is supported on that release of OpenVMS VAX. (I just added a
whole bunch of new information and new systems to the article that was
referenced back in .1, and looks like I missed this system. If you do
not have a current copy of that article, you'll want to get one...)
|
240.3 | and 5-5.2 on a mv3000 model 88? | MKTCRV::KMANNERINGS | | Wed Mar 12 1997 09:03 | 6 |
| A customer today tried to install OVMS 5-5.2 on a 3100 model 88 and got
no joy. Is this because it is not supported ? Can he do anything about
it?
..Kevin..
dtn 822 4320
|
240.4 | Need Remastered (full) OpenVMS Kit For V5.5-2H4 | XDELTA::HOFFMAN | Steve, OpenVMS Engineering | Wed Mar 12 1997 09:40 | 15 |
|
"No joy" isn't a valid OpenVMS error message. What were the error
messages generated during (I assume) the failed bootstrap), and what
where the OpenVMS kit(s) that were installed?
One must have a remastered kit -- "remastered" means the kit is a
full kit and can be installed and booted from a clean disk -- for
V5.5-2H4, as one cannot use one of the OpenVMS V5.5 kits and then
hope to apply the V5.5-2 upgrade kit, as V5.5 will not boot on this
box.
Note that if there is anything in this system that requires a later
release of OpenVMS, the customer will need to upgrade -- OpenVMS VAX
V7.1 is the current release.
|