Conference vaxaxp::vmsnotes

171.0. ""dump disk served by HSC & host" message from autogen" by POMPY::LESLIE (Andy Leslie, DEC man walking...) Tue Feb 11 1997 07:29

    
    Since I installed 7.1, the GENFILES phase of autogen produces this
    message.
    
	** INFORMATIONAL ** - The Current dump disk _$1$DUA0: is seen to be
		served by one HSC or HSJ controller and by a VAX host.
		This may simply indicate that one path has not been used
		since boot time, or that the disk is dual-pathed between
		an HSC/HSJ and a local controller (which can interfere
		with dumping), or possibly a hardware problem.

    The disk is part of a shadowset, viz:

Device                  Device           Error    Volume         Free  Trans Mnt
 Name                   Status           Count     Label        Blocks Count Cnt
DSA0:                   Mounted              0  VMS             785607   307   1
$1$DUA0:      (HSC000)  ShadowSetMember      0  (member of DSA0:)
$1$DUA77:     (HSC000)  ShadowSetMember      0  (member of DSA0:)
    
    and is only connected via an HSC70 to a standalone VAX 6000 440.
    
    Ideas welcome. 
    
    Thanks
    
    Andy

    It appears Autogen is being a tad paranoid over access to the disk
    and trying to be helpful and warn you about the non-HSC path...
    but it looks like it got it wrong. Please QAR it.
    
    d.

    re: .1 Thanks Dave.