| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 3520.1 | Transport port is closed | BULEAN::DYER | | Wed Jun 26 1996 12:13 | 16 |
| 3520.2 | Does a Closed TPDU hinder the transport deletion? | ZUR01::SCHNEIDER | Kurt Schneider, SW-Support Zurich | Wed Jun 26 1996 14:09 | 30 |
| 3520.3 | Error status %x0000200c when deleting x25 access | BLG03::SALVATORELLI | | Wed Mar 19 1997 11:24 | 21 |
| Hi there,
we are having the same problem as .0 with DECnet/OSI V6.3 VAX and
ECO05.
When shutting down the system we get the
%NET$SHUTDOWN -I-SHUTENTITY, shutting down TRANSPORTS
error message and the system hangs.
Just before this, after disabling the x25 access
when trying to delete the x25 access we get ** Error status =
%X0000200C
Do you know what does it mean?
Can you help please?
Thanks for your help, in advance
Marilena
|
| 3520.4 | I just HALT and BOOT ... | MARVIN::CARLINI | | Wed Mar 19 1997 14:08 | 8 |
| Does this system have lots of security entries? If so then that gets
fixed in the ECO after V6.3-6. I didn't think it caused a hang though,
so there may be some other problem somewhere else that causes that.
But since you are shutting down the system, the easy workaround is to
put a $EXIT right at the start of the NET$SHUTDOWN command procedure.
Antonio
|
| 3520.5 | ECO after V6.3-6 ?? | BLG03::SALVATORELLI | | Thu Mar 20 1997 10:51 | 5 |
| Antonio,
which fix are you referring to?
What is the ECO after V6.3 ECO06 and where can I get it from?
Thanks
Marilena
|
| 3520.6 | | MARVIN::CARLINI | | Fri Mar 21 1997 00:50 | 25 |
| > which fix are you referring to?
There is a fix for the PSI shutdown producing an error message i.e. it fixes the
part of the problem in 3520.3:
> Just before this, after disabling the x25 access
>
> when trying to delete the x25 access we get ** Error status =
> %X0000200C
The hang shutting down transport is something I've seen in passing. There is (I
think) a fix for that too which will presumably be in an ECO. But since you are
shutting down the system, you can probably just skip the whole of the network
shutdown by putting a $EXIT at the top of the network shutdown procedure.
> What is the ECO after V6.3 ECO06 and where can I get it from?
I presume it will be V6.3 ECO07 but that's just a wild stab in the dark :-)
You can get it once it's released, but it does not currently exist.
If you want the fix for the problem shutting down PSI, let me know and I'll dig
out the fixed image. It's a low risk fix.
Antonio
|
| 3520.7 | fix for PSI | BLG03::SALVATORELLI | | Fri Mar 21 1997 04:07 | 6 |
| Antonio,
thanks for the quick reply.
Could you let me have the fix related to the PSI shut down
problem and tell me how to apply it?
Bye
Marilena
|