Conference decwet::networker

747.0. "NSR 4.3 alpha NT, TLZ7L" by EVTAI1::5dhcp146.evt.dec.com::BERNEUIL () Thu Jun 05 1997 09:41

	Hello,


	Prioris MX 6200
	NT 4.0 server US SP 2
	NSR 4.3

	integrated SCSI controler AIC78xx. ( Multiple Lun: enable in the setup of
						this controler )
	TLZ7L-DA  firmware 4BQH 



	My customer has the following problem:

	Using Networker Administrator, he loads a tape ( for example the second tape )
	the he unloads this tape and automaticaly the next one is loaded.


	When we run JBCONFIG, the juke box is seen as

	these are the scsi jukeboxes currently attached to your system:
	"[email protected]: other, vendor "DEC", product "TLZ7" (c)DEC 

	Unde NTbackup, hardware setup we got TLZ7.


	On my system ( axp 150 NT 4.0 NSR alpha 4.3 ), our TLZ7L works fine: the next tape 
	is not loaded, it stays in "SEL SLOT"
	The jukebox is seen as Digital 4mm DAT

	Is it normal to get " other, vendor DEC, product TLZ7 ?

	Thank's

	Michel BERNEUIL  French CSC



		
	  

	The NT/Intel version of NetWorker is provided by Legato and
	they do not recognise the DIGITAL 4mm products.  The software
	ejected before the move.  This is needed on all but the DAT
	and DLT loaders.  The TLZ7L acts like a loader puts the next
	tape in the drive before the software can make the move.

	The group that provides the DAT loaders did not get them
	supported by Legato.  Jeff James is the product manager 
	for On-Base DAT products.