| T.R | Title | User | Personal Name
 | Date | Lines | 
|---|
| 47.1 |  | UTRTSC::SWEEP | I want a lolly... | Thu Jan 23 1997 10:29 | 35 | 
| 47.2 | example how to reproduce | BACHUS::BERGMANS |  | Fri Jan 24 1997 16:00 | 206 | 
|  | Hello Adrie,
The problem can been reproduced as will, here are the commands I give on 
node "GASTON", note in the last command: nbshow knbstatus gaston, that the
Socket buffer bytes counter is also increased. The version of UCX is here 
  DEC TCP/IP Services for OpenVMS VAX Version V3.3 - ECO Level 8
  on a VAXstation 3100 running OpenVMS V5.5-2
but the behavior is the same with ucx 4.1 eco3.
The command "nkshow knbstatus delco_wfw" tells ": No response for delco_wfw"
although the trace shows a send packet, and the ucx counter increased. (I can
make the traces available if you want)
I will escalate this to engineering.
I suppose it is better to move this problemdiscussion to the PWV50IFT notes
conference?
$ ucx sho dev /port=137/full
Device_socket: bg8         Type: DGRAM       LOCAL               REMOTE
                              Port:            137                    0
                              Host:     0.0.0.0             0.0.0.0
                              Service:
                                                           RECEIVE       SEND
                                   Queued I/O                    0             0
       Q0LEN         0             Socket buffer bytes        1086             0
       QLEN          0             Socket buffer quota        9000          9000
       QLIMIT        0             Total buffer alloc        10968             0
       TIMEO         0             Total buffer limit        36000         36000
       ERROR         0             Buffer or I/O waits           0             0
       OOBMARK       0             Buffer or I/O drops           0             0
                                   I/O completed             22180           176
                                   Bytes transferred       1172156          9520
  Options:  BROAD
  State:    PRIV
  RCV Buff: SEL
  SND Buff: SEL
$ nbshow knbstatus soupap_dos
Adapter status for soupap_dos on
ID:  8  0 2B 9D AE E9  Version  1.2  Time up: 0 days 0 hours 0 minutes
Packets sent:                  0        CRC errors:             0
Packets received:              0        Alignment errors:       0
Retransmitted packets:         0        Collisions:             0
Resources exhausted:           0        Aborted transmissions:  0
Ncbs:      Free  :    24 of    13;  maximum configurable:    13
Sessions:  In use:     0 of    14;  maximum configurable:    14
Adapter packet size: 65535
Local name table (3 names):
Name            Soc Num Status
SOUPAP_DOS      x 0   1 Unique Registered
IMPERVIL        x 0   2 Group  Registered
SOUPAP_DOS      x52   3 Unique Registered
$
$ nbshow knbstatus soupap_dos
$ ucx sho dev /port=137/full
Device_socket: bg8         Type: DGRAM       LOCAL               REMOTE
                              Port:            137                    0
                              Host:     0.0.0.0             0.0.0.0
                              Service:
                                                           RECEIVE       SEND
                                   Queued I/O                    0             0
       Q0LEN         0             Socket buffer bytes        1243             0
       QLEN          0             Socket buffer quota        9000          9000
       QLIMIT        0             Total buffer alloc        12796             0
       TIMEO         0             Total buffer limit        36000         36000
       ERROR         0             Buffer or I/O waits           0             0
       OOBMARK       0             Buffer or I/O drops           0             0
                                   I/O completed             22184           182
                                   Bytes transferred       1172481          9820
  Options:  BROAD
  State:    PRIV
  RCV Buff: SEL
  SND Buff: SEL
$
$ nbshow knbstatus delco_wfw
: No response for delco_wfw
$
$ ucx sho dev /port=137/full
Device_socket: bg8         Type: DGRAM       LOCAL               REMOTE
                              Port:            137                    0
                              Host:     0.0.0.0             0.0.0.0
                              Service:
                                                           RECEIVE       SEND
                                   Queued I/O                    0             0
       Q0LEN         0             Socket buffer bytes        1773             0
       QLEN          0             Socket buffer quota        9000          9000
       QLIMIT        0             Total buffer alloc        16452             0
       TIMEO         0             Total buffer limit        36000         36000
       ERROR         0             Buffer or I/O waits           0             0
       OOBMARK       0             Buffer or I/O drops           0             0
                                   I/O completed             22242           209
                                   Bytes transferred       1175901         11170
  Options:  BROAD
  State:    PRIV
  RCV Buff: SEL
  SND Buff: SEL
$nbshow knbstatus jefke
Adapter status for jefke on
ID: AA   0   4   0  ED  FC   Version  3.0
Time up: 3 days 19 hours 28 minutes
Packets sent:                  0        CRC errors:             0
Packets received:              0        Alignment errors:       0
Retransmitted packets:         0        Collisions:             0
Resources exhausted:           0        Aborted transmissions:  0
Ncbs:      Free  : 65535 of 65535;  maximum configurable: 65535
Sessions:  In use:    15 of    30;  maximum configurable:    30
Adapter packet size:  1497
Local name table (12 names):
Name            Soc Num Status
PWRK$LPAS$OP    x20   1 Unique Registered
PWRK$LPAS$OP    x43   2 Unique Registered
PWRK$LS         x47   3 Group  Registered
PWRK$LPAS$OP    x4c   4 Group  Registered
DBC038CMTSERVER x20   5 Unique Registered
JEFKE           x20   6 Unique Registered
JEFKE           x 0   7 Unique Registered
IMPERVILLE      x 0   8 Group  Registered
IMPERVILLE      x1c   9 Group  Registered
IMPERVILLE      x1d  10 Group  Registered
PCI_CLUSTER     x 0  11 Group  Registered
^^^^^^^^^^^^^^^ xff  12 Unique Registered
$ucx sho dev/port=137/full
Device_socket: bg8         Type: DGRAM       LOCAL               REMOTE
                              Port:            137                    0
                              Host:     0.0.0.0             0.0.0.0
                              Service:
                                                           RECEIVE       SEND
                                   Queued I/O                    0             0
       Q0LEN         0             Socket buffer bytes        2092             0
       QLEN          0             Socket buffer quota        9000          9000
       QLIMIT        0             Total buffer alloc        18280             0
       TIMEO         0             Total buffer limit        36000         36000
       ERROR         0             Buffer or I/O waits           0             0
       OOBMARK       0             Buffer or I/O drops           0             0
                                   I/O completed             23027           280
                                   Bytes transferred       1217958         14720
  Options:  BROAD
  State:    PRIV
  RCV Buff: SEL
  SND Buff: SEL
$nbshow knbstatus gaston
Adapter status for gaston on
ID: AA   0   4   0  A7  FB   Version  3.0
Time up: 2 days 1 hours 9 minutes
Packets sent:                  0        CRC errors:             0
Packets received:              0        Alignment errors:       0
Retransmitted packets:         0        Collisions:             0
Resources exhausted:           0        Aborted transmissions:  0
Ncbs:      Free  : 65535 of 65535;  maximum configurable: 65535
Sessions:  In use:    13 of    45;  maximum configurable:    45
Adapter packet size:  1497
Local name table (9 names):
Name            Soc Num Status
DBC572CMTSERVER x20   1 Unique Registered
GASTON          x20   2 Unique Registered
GASTON          x 0   3 Unique Registered
IMPERVILLE      x 0   4 Group  Registered
IMPERVILLE      x1c   5 Group  Registered
IMPERVILLE      x1d   6 Group  Registered
PCI_CLUSTER     x 0   7 Group  Registered
PCI_CLUSTER     x20   8 Group  Registered
DBC572_210000BD x 0   9 Unique Registered
$ucx sho dev/port=137/full
Device_socket: bg8         Type: DGRAM       LOCAL               REMOTE
                              Port:            137                    0
                              Host:     0.0.0.0             0.0.0.0
                              Service:
                                                           RECEIVE       SEND
                                   Queued I/O                    0             0
       Q0LEN         0             Socket buffer bytes        2357             0
       QLEN          0             Socket buffer quota        9000          9000
       QLIMIT        0             Total buffer alloc        20108             0
       TIMEO         0             Total buffer limit        36000         36000
       ERROR         0             Buffer or I/O waits           0             0
       OOBMARK       0             Buffer or I/O drops           0             0
                                   I/O completed             23051           284
                                   Bytes transferred       1219421         15147
  Options:  BROAD
  State:    PRIV
  RCV Buff: SEL
  SND Buff: SEL
$ log
 | 
| 47.3 |  | UTRTSC::SWEEP | I want a lolly... | Wed Jan 29 1997 09:40 | 6 | 
|  |     If you want to eacalate it, then yes, 
    this is not the right conference.
    
    Issue an ipmt request.
    
    Adrie
 | 
| 47.4 | ASTAT crash in some versions of PATHWORKS for OSF/1 (LANMAN) | JAMIN::WASSER | John A. Wasser | Fri Feb 07 1997 14:48 | 20 | 
|  | > First of all the NBSHOW command simply sends out a netbios status request 
> to the client and the client responds on that by sending the server a nr 
> of statistic values.
>
> I can't imagine that this causes something to lock up on the server side, 
> (but if you say so, then i believe you).
	At least one version of PATHWORKS for OSF/1 (LANMAN) would
	crash if it received a NetBIOS ASTAT (Adapter Status) request.
	I don't know if the problem was protocol-specific (DECnet, TCP/IP,
	or NetBEUI).  You could trigger the crash with the SHOW ASTAT
	command from a PATHWORKS client.
	I think problem was noticed first back in the PATHWORKS V5.1 
	for DOS and Windows days but I don't have a record of it.  A
	bug-fix release of the PATHWORKS client licensing components 
	used an ASTAT call to check the availability of a particular
	NetBIOS name (the FindName call was added to the NetBIOS API
	later in its life and may not always be present).  This started
	to cause crashes on PATHWORKS for OSF/1 (LANMAN) servers.
 | 
| 47.5 | Did you know? | VMSNET::P_NUNEZ |  | Fri Mar 28 1997 15:22 | 23 | 
|  |     
    Adrie/Rob,
    
    Are you aware that nbshow knbstatus will display a maximum of 112
    client sessions? (I'm not sure about nbstatus.)  I saw it on a
    customer's system (contrasted with $ ucx sh dev/port=139 count).  
    
    The customer had reached max # of client sessions at 350 and we were
    trying to confirm with:
    
    	$ define sys$output x.x
    	$ nbshow nbstatus
    	$ nbshow knbstatus
    	$ mc ncp show known links
    	$ deassign sys$output
    	$ SEARCH X.X ESTAB, PWRK$LMMCP/MATCH=OR/NOOUT/STAT
    
    But "Records matched" from the stats was only something like 242.  A
    co-worker pointed out that KNBSTATUS will only list 112 clients.  We
    got a count from $ UCX SHOW DEV/PORT=139 and found there were really
    some 220 clients connected over IP.
    
    Paul
 | 
| 47.6 |  | UTRTSC::SWEEP | I want a lolly... | Wed Apr 02 1997 09:50 | 9 | 
|  |     Paul
    
    No we were not aware. As soon as we have some spare time we'll
    have a look at it.
    
    Best is to issue a low prio qar.
    
    Thanks for reporting
    Adrie
 | 
| 47.7 |  | UTRTSC::SWEEP | I want a lolly... | Wed Apr 02 1997 15:21 | 6 | 
|  |     Paul
    
    I saw the problem that you describe. I also saw that
    PWRK$SDA works ok, so I suggest you use that.
    
    Adrie
 | 
| 47.8 |  | UTRTSC::SWEEP | I want a lolly... | Thu May 15 1997 16:33 | 4 | 
|  |     It was assigned to me 2 days ago.
    Its fixed.
    
    Adrie
 | 
| 47.9 | How will we get it? | VMSNET::P_NUNEZ |  | Thu May 15 1997 23:33 | 4 | 
|  |     
    Will it be in v5.0F (will it work with previous versions)?
    
    Paul
 | 
| 47.10 |  | UTRTSC::SWEEP | I want a lolly... | Tue May 20 1997 11:57 | 3 | 
|  |     I entered it for f.
    
    Adrie
 |