| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 314.1 | | JAMIN::WASSER | John A. Wasser | Tue May 27 1997 11:24 | 15 |
| > What I do not know is what *else* gets installed when PW licensing
> is installed?
Lots of stuff, including the entire Information Shelf.
> Does the dratted DECIOCB stuff get installed?
Probably, but Licensing does not need it. You can avoid it
by using the stand-alone PATHWORKS Licensing kit (V1.4)
that was recently released. It does not install anything but
Licensing.
> If so, will this interfere with Reflection over Telnet?
Probably.
|
| 314.2 | | THOLIN::TBAKER | The Spirit of Apathy | Tue May 27 1997 11:36 | 13 |
| >> If so, will this interfere with Reflection over Telnet?
I would think not.
PWTELNT talks over Microsoft's TCP/IP through Microsoft's
WINSOCK interface. As good as it is, I don't think
Microsoft uses DECIOCB.... :-)
Without anything loaded from our kit except PWTELNT, DECTAL and
VT320 (assuming Microsoft's TCP/IP is loaded) you should be
able to connect to a host with VT320.
Tom
|
| 314.3 | where is 1.4? | VMSNET::DMCFARLAND | still TurboMom[tm]... | Tue May 27 1997 12:01 | 21 |
| John,
Where can the following be obtained for external use? I saw the
internal pointer, but is there a Web location where customers can
download this?
>the stand-alone PATHWORKS Licensing kit (V1.4)
>that was recently released.
Regarding...
>Lots of stuff, including the entire Information Shelf.
With all due respect to the IS authors, it is seldom that I can
resolve support issues for customers by using IS...
This is why I appreciate the feedback from people in this forum.
Thanx,
Diane
|
| 314.4 | See note 3. | JAMIN::WASSER | John A. Wasser | Tue May 27 1997 16:44 | 20 |
| > Where can the following be obtained for external use? I saw the
> internal pointer, but is there a Web location where customers can
> download this?
>
>> the stand-alone PATHWORKS Licensing kit (V1.4)
>> that was recently released.
Sorry, I'm just a lowly software engineer. I don't get to
make files available to customers. In the past the licensing
kit has been available through the "public patch search and
download" service:
http://www.service.digital.com:8031
I tried that and only found the old V1.3 kit.
I think your best bet is to ask the PATHWORKS 32 product
manager or the PATHWORKS for OpenVMS (NetWare) product
manager whoe doubles as the PATHWORKS Licensing product
manager. See note 3 for a list of product managers.
|
| 314.5 | Almost soup... | DELNI::GORCZYCA | PATHWORKS Prod/Bus Mgmt | Wed May 28 1997 10:44 | 17 |
| re: availability
The PATHWORKS Licensing Software Kit V1.4 ($10 US, QA-2CLAA-H8) shipped from SSB
on Friday, May 23rd.
I am still awaiting word on its availability from TIMA, but this should occur
in hours. Once the TIMA kit is available, it'll be posted in the location that
John referenced in the last reply. ...I'll try to post a note when it's soup.
We'll also provide a pointer on the PATHWORKS InfoCenter web page at
http://www.digital.com/pathworks
In fact, we are going to provide a special area on that web site for lots of
licensing-related info and help.
John
|
| 314.6 | Available over ftp... | DELNI::GORCZYCA | PATHWORKS Prod/Bus Mgmt | Wed May 28 1997 14:07 | 14 |
| re: availability
The TIMA kit was loaded on Friday.
The kit is available (publically) over the net at:
ftp://ftp.service.digital.com/public/windows/pc/v6.22/pathworks/6.0
You should read pwlic14_eo1.CVRLET_TXT
You should use pwlic14_eo1.exe
John
|
| 314.7 | fingers (and toes) x'd | VMSNET::DMCFARLAND | still TurboMom[tm]... | Wed May 28 1997 14:42 | 7 |
| ...and there was much rejoicing. ;-)
Thanx for the info. I just gave the ftp location to my Reflection
customer.
Hoping for the best,
Diane
|