[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference jamin::pathworks32

Title:Digital PATHWORKS 32
Moderator:SPELNK::curless
Created:Fri Nov 01 1996
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:337
Total number of notes:1612

304.0. "Error code 1717 ???" by MYOTT::PERRY (Dave Perry ZKO2-3/L32 DTN:381-2396) Mon May 19 1997 14:39

Hi folks,

Last Thursday I installed PW32 V7.0 on an AXP 150 with the following 
configuration:

   Hardware:
	AXP 150 with  80 MB memory. 
	Firmware V4.31  
	DE422 NIC  
	1740 Scsi Adapter
	Couple of RZ26 disk drives

   Software
	New install of NT 4.0 Server with SP2 installed.
	Server set up as a Backup Domain Controller
	NetBEUI and TCP/IP installed.

I did a "custom install" of PW32 from the CD, and chose ONLY DECnet
from the Options list, and VT320 from the "Terminal Emulation"
setup screen.  I didn't choose any other options (No LAT, no Infoserver
support, no licensing, etc).  The installation went smoothly, but after
a reboot I noticed the following error appearing in the System Event log
right after the Event log Service was started:

	"The server service was unable to map error code 1717".

I removed Pathworks per the instructions in the release notes and the
error went away so I assume "error code 1717" must be a Pathworks code.  
Any idea what error code 1717 is?

-Dave
T.RTitleUserPersonal
Name		DateLines