| Title: | Digital PATHWORKS 32 |
| Moderator: | SPELNK::curless |
| Created: | Fri Nov 01 1996 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 337 |
| Total number of notes: | 1612 |
Hello, A customer try to install Pathworks 1.0A on Windows95 OSR2 (hinote VP575 platform) The setup runs fine. The Properties from the network are correct -------------------------------- Client pour les reseaux Microsoft Carte 3C589C Netbeui Pathworks Lat Pathworks Decnet Pathworks Ndis Fichier et Imprimantes patagees pour les reseaux Microsoft Pathworks Licensing Agent --------------------------------- When the PC reboot PW.LOG shows --------------------------------- DECCORE V1.0.028 DECIOCB V1.0.028 DECSHOW Version 1.0.2 DECLMAP Version 1.0.7 Pathworks Licensing Client License Responder Version 1.0.30 ERROR : LICL008E : Networks Software not loaded or problem configuring network DECNDIS Version 1.0.10 DECLAT Version 1.0.24 DECDNP Version 1.0.27 Pathworks LAN Manager Client Transponder ERROR : LRQL0011W : DECLICL.VXD is not in memory ------------------------------------------------- Desinstall - reinstall (SETUP FORCENEW) without any effect DECNDIS is always loaded after Pathworks Licensing ------------------------------------------------- In SYSTEM.INI [boot] device= instlicl.dll is present ------------------------------------------------- Such install works fine with Windows95 950a Any suggestion Jacques [Posted by WWW Notes gateway]
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 256.1 | It's all in the power. | KAOT01::M_GREEN | Mon Apr 28 1997 12:23 | 24 | |
Jacques,
sounds similar to a problem I ran into recently with the adjunct 3com
3c562 which upon installation of OSR2 stopped working for one of my
customers. As it turned out, and was interesting to know, the OSR2
Modem PC card power management feature is not compatible with
multifunction adapters (combo).
The resolution was to disable the "Turn off PC Card modems when not in
use" power feature. The steps as I recall was:
1. Remove PCMCIA device from the PC card socket
2. Restart computer. When you see "Starting Windows 95" message,
press the F8 key, and choose Safe Mode from Startup menu.
3. In Control Panel, double click power.
4. On the PC Card Modem tab, click on "Turn off PC Card modem when not
in use" check box to clear it.
5. Click OK
6. Shut down and then restart the computer normally.
Hope this help mon ami.
Bonne chance.
Mike.
| |||||
| 256.2 | PW32 support over OSR2 is the question | PRSSOS::GAUTIER | Tue Apr 29 1997 06:40 | 11 | |
Thanks Mike for your quick answer,
I've been working with Jacques on this problem.
Before going into further investigation, I'd like to get an official
answer from engineering :
Is Pathworks 32 (and Pathworks for Win95 V1.0A) officially supported on
OSR2 (the documentation only talks about WINNT4.0 and Win95).
Best regards,
Didier GAUTIER / France PCI Support group
| |||||
| 256.3 | SPELNK::curless | Wed Apr 30 1997 10:45 | 15 | ||
Officially ... PATHWORKS for Windows 95 v1.0, or v1.0a would not support OSR2 as, OSR2 came out AFTER both of those shipped. PATWORKS 32 has not been tested with OSR2 to my knowledge. Jeff P.S. Life is going to get even more interesting with supporting NT/W95... as Microsoft has been shipping NEW SOFTWARE in their service updates... not just bug fixes... and the updates are going to be more and more related to new functionality, and less bug fixes. | |||||