Conference jamin::pathworks32

      <<< Note 202.0 by GIDDAY::COOK "Matt Cook , CSC Sydney Australia" >>>
           -< HiNote VP 500 series won't boot after install of PW32 >-


	G'day All,

    I have an interesting one, I have a Hinote VP 575 , running Win95 , got
    networking all  working, then installed PW32 , with 3com 589 pcmcia
    card , install went ok however on reboot of win95 displays WINDOWS95
    screen with scrolling bar at bottom after about 15 sec the hinote
    powers off, I can only start it in safe mode, we have also had a number
    of customers reporting the same problem has anyone seen this, I have
    tried disable power save settings, this made no difference.


	Thanks,

	Matt Cook

    
                                                               

    Just for daftness try changing the screen type to svga as have had mail
    stating 
    "customer has a new Hinote VP560 and cant get it to boot work with
    Pathworks for
    Windows 95 V1.0a. it will fail then try and boot to safe mode, (no
    network).
    When booting you get the banner then it reboots to safe mode. There is
    not even
    a boot.log"
    
    Solution:
    Problem was due to the factory installed display driver, NeoMagic,
    changed to standard SVGA, now client boots with win95/pw95 and on network.
     
    
    	Trev
    

	Just to let you all know, there is a new version of the NEOMAGIC 
	driver that corrects this problem.
	Version is v5.35

	Matt Cook

[Posted by WWW Notes gateway]

Hi.

Where can we found this new driver ?

And is it for Hinote VP510 till VP545 or
for VP550 till VP575 ?

Many thanks for a quick reponse.

DDB.

[Posted by WWW Notes gateway]