| Title: | Digital PATHWORKS 32 |
| Moderator: | SPELNK::curless |
| Created: | Fri Nov 01 1996 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 337 |
| Total number of notes: | 1612 |
This is actually a rehash of notes 74 and 132 but there was no real
solution so here it goes again:
When upgrading from NT 3.51 and pathworks 4.1b (to NT 4.0 and pathworks
32) printing to an lps17 (network printserver) no longer works.
Using the following setup; Add Printer->My Computer->Add Port->Digital
Network Port(click twice on this)->DECnet (this is when the error below
appears) and you can finish the setup but of course it does not work.
The DECnet protocol is not currently available.
You may configure the port for DECnet, but the port will not operate.
Is this due to the new Winsock 2 complaint DECnet component and the
checks for DECnet used by the Digital Network Port being done via some
old method.
Customer says they reported this in Field Test for Pathworks 32 and was
told that nobody else had this problem and it was never fixed. I was
able to reproduce here at the CSC and will be excalating if no
response.
Thanks in advance...
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 201.1 | VMSNET::N_WILKINSON | 16 bit? We don't need no stinkin' 16 bit! | Wed Apr 16 1997 11:04 | 5 | |
WIN95 has the same problem with pw/win95 v1.0/1.0a. I was told then is was a Microsoft problem since they provide the Printserver software with WIN95 and NT and it does not recognize that DECnet is installed. Nelson | |||||