| Title: | Digital PATHWORKS 32 |
| Moderator: | SPELNK::curless |
| Created: | Fri Nov 01 1996 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 337 |
| Total number of notes: | 1612 |
hello,
Sometimes with eXcursion I have the following error message :
> The following error occured while attempting to start
>'sys$system:decw$terminal' on brise over TCP/IP (rsh)
>
> Network routine connect() failed, error = EADDRINUSE
I have modify in UCX the RSH limit but the error still appears.
what's wrong ????
Thank you
remi
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 122.1 | JAMIN::OSMAN | Eric Osman, dtn 226-7122 | Tue Feb 11 1997 14:53 | 10 | |
I use "rexec" choice for TCP in excursion control panel (account tab) instead of "rsh" and it works well. Will this solve your problem ? (I tried using "rsh" and it fails, probably because our vms host doesn't have what we need in order to use it) /Eric | |||||
| 122.2 | ok, that's work | LEMAN::FOUCHAULT | Vous ici ! Quelle bonne surprise... | Wed Feb 12 1997 02:43 | 3 |
Yes, thank you !!!
remi
| |||||
| 122.3 | PEACHS::GHEFF | Got a head with wings | Wed Feb 12 1997 08:56 | 15 | |
Rsh use on VMS requires a bit of work. One must set up a UCX "proxy"
to grant users access from specific remote systems.
Something like:
UCX> ADD PROXY GHEFF /REMOTE_USER=GHEFF /HOST=GHEFFPC
The proxy name is GHEFF, the name of the user being allowed to connect
to this VMS system is GHEFF, and the PC that he's connecting from is
GHEFFPC.
Once all that's done, rsh connections should work.
#Gary
| |||||
| 122.4 | Yes, but..... | LEMAN::FOUCHAULT | Vous ici ! Quelle bonne surprise... | Wed Feb 12 1997 10:16 | 9 |
Hi gary,
I set this proxy before I wrote this note. So, maybe my OpenVMS system
need some more tuning concerning this problem.
I tried Eric's solution and it's working.
Thank's again
remi
| |||||