| Title: | Pro/ENGINEER Conference |
| Notice: | Do a DIR/TITLE before writing a new note |
| Moderator: | ALLVAX::SYSTEM |
| Created: | Fri Oct 07 1988 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 426 |
| Total number of notes: | 1446 |
[ Cross posted from WRKSYS::ALPHASTATION ]
Hi,
I encounter the following error when running Pro E v18 for the
first time after rebooting on AlphaStation 500/400 with UNIX 4.0a,
Open3D 4.2 and 4D40 graphic card.
Xlib: Connection to ":0.0" refused by server
Xlib: Client is not authorised to connect to server
An error has occurred. The following chain of information is
available:
error1: /Arg/X Display/
message: unable to Open X display
errno: 57 : Socket is not connected,
display name : :0.0
After I stop/start the network and restart the apps, I have the
following message:
X protocol error : BadValue ( integer parameter out of range for
operation)
request code = 51 (X_SetFontPath)
resource id = 1077338880
minor code = 0
major code = 2
Error Opening Display
Apart from the "X protocol error" message the second time round, I
am able to start Pro E application successfully.
This is the first time i am installing Pro E. Is there some setenv
that i missed or perhaps patches ? BTW, I started off with UNIX 4.0B.
Pro E hang during installation.
thanks in advance,
mike yun
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 421.1 | read the hardware config notes | HYDRA::DONSBACH | Jeff Donsbach, Software Partner Engineering, DTN 297-6862 | Wed Apr 16 1997 11:16 | 23 |
Second Error -
Read the Pro/E hardware config notes. In it, it says to create the
following symbolic link -
# cd /usr/lib/X11/fonts
# ln -s misc MIT
That gets rid of the second error. As you saw, it is not fatal anyway.
For the first error, I have seen this before, but I can't remember
under exactly what circumstances. I think it had something to do
with Open 3D not being installed correctly. In any case, the "reboot"
seems to have cleared that problem for you as well. How did you install
Open 3D? Were you in single user mode, or mult-user mode? If you were
in multi-user mode, you would need to reboot to get the Xserver
restarted with the OpenGL extension running.
Jeff D.
| |||||
| 421.2 | ALLVAX::STAATS | T is for Todd | Wed Apr 16 1997 12:20 | 14 | |
The first error looks like a DISPLAY issue. either the DISPLAY
environment variable is redirected or you're attempting to run
Pro/E through a different account than the one you've logged into
the system as. For example if I log in as 'myself' on my workstation,
perform an 'su' to get to the root account then try to run Pro/E
i get the following:
Xlib: connection to ":0.0" refused by server
Xlib: Client is not authorized to connect to Server
Error opening display
Are you running CDE environment or are you running the DXterm windows?
todd///
| |||||