[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference allvax::pro_engineer

Title:Pro/ENGINEER Conference
Notice:Do a DIR/TITLE before writing a new note
Moderator:ALLVAX::SYSTEM
Created:Fri Oct 07 1988
Last Modified:Thu Jun 05 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:426
Total number of notes:1446

413.0. "Kauai hangs with Pro/E & AccelPRO 2000" by OSLLAV::JENSH (Jens Holwech, SI Technology Group, Norway (DTN 872-8543)) Thu Feb 06 1997 17:14

A customer and a PTC AE has seen similar problems as 
those discussed in 408.*, but this is on a PWS 200i.
This is reproducable through the attached trail file,
and a few additional commands. According to the 
customer, the problem is often seen when more than
one window is in use. The problem only occurs with
the OpenGL driver for the AccelPRO 2000. The customer
was running NT 3.51, using version 3.2.1 (and earlier)
of the driver. I could also reproduce this on NT 4.0, 
using the 4.1 (and earlier) drivers. This problem was 
not visible on a Miata, using physically the same 
graphics card, with the 4.1.03 driver. I could also
not reproduce this on an HP Vectra XW with AccelPRO
2500TX, under NT 4.0, using the 4.1 drivers. I know
that the problem was evident with Pro/E 17 9647, and
I believe it was also visible on 9639.

The trail file uses two of the standard Pro/E demo 
directories, hset17 and mfgintro17. The trail file
assumes that these directories are available under
C:\PTC\DEMO. Once the trail file completes, select
"retrieve", hit return to use the default part, and
the machine usually hangs. I've seen instances where
this did not hang the system. Going into "spin" mode
was then sufficient to create the hang.

The trail file is in .1.

Regards,
Jens
T.RTitleUserPersonal
Name		DateLines
413.1Trail file for reproducing the hangOSLLAV::JENSHJens Holwech, SI Technology Group, Norway (DTN 872-8543)Thu Feb 06 1997 17:15784
!trail file version No. 940
!Pro/ENGINEER  TM  Release 17.0  (c) 1988-96 by Parametric Technology Corporation  All
Rights Reserved.
!Select a menu item.
#ENVIRONMENT
#DISP DTMPLN
!Datum planes will NOT be displayed.
#DISP POINTS
!Datum points will NOT be displayed.
#DISPPNTTAGS
!Datum point tags will not be displayed.
#DISP AXES
!Axes will not be displayed.
#DISP CSYS
!Coordinate Systems will not be displayed.
#SPIN CENTER
!Spin Center will not be displayed.
#SAVE DISP
!Display will not be saved with model.
#SKETSTART2D
!Sketcher will not change orientation upon starting.
#KEEPINFODTM
!Datum features created during Info will not be added to the model.
#MODEL TREE
!Model tree window will not be displayed.
#SHADING
!Shaded model will be displayed
#DONE-RETURN
#MISC
#CHANGE DIR
!Enter NEW DIRECTORY name: 
?
!Directory searched is: C:\PTC\bin
#UP..
!Directory searched is: C:\PTC
#/demo
!Directory searched is: C:\PTC\demo
#/hset17
!Directory searched is: C:\PTC\demo\hset17
#HERE
!Successfully changed to C:\PTC\demo\hset17\ directory.
#DONE-RETURN
#DRAWING
#SEARCH/RETR
!Directory searched is: C:\PTC\demo\hset17
#/asm_dir
!Directory searched is: C:\PTC\demo\hset17\asm_dir
#UP..
!Directory searched is: C:\PTC\demo\hset17
#/mfg
!Directory searched is: C:\PTC\demo\hset17\mfg
#UP..
!Directory searched is: C:\PTC\demo\hset17
#/misc_dir
!Directory searched is: C:\PTC\demo\hset17\misc_dir
#UP..
!Directory searched is: C:\PTC\demo\hset17
#/udf
!Directory searched is: C:\PTC\demo\hset17\udf
#UP..
!Directory searched is: C:\PTC\demo\hset17
#UP..
!Directory searched is: C:\PTC\demo
#/mfgintro17
!Directory searched is: C:\PTC\demo\mfgintro17
#drill_core_fixture.drw
!30-Jan-97 13:27:24  Start C:\PTC\demo\mfgintro17\drill_core_fixture.drw.1
!30-Jan-97 13:27:25  Start C:\PTC\demo\mfgintro17\HOUSING_CORE_MFG.asm
!30-Jan-97 13:27:27  Start C:\PTC\demo\mfgintro17\HOUSING_CORE.prt
!Restoring family table instances of HOUSING_CORE from family table file.
!30-Jan-97 13:27:29  End   C:\PTC\demo\mfgintro17\HOUSING_CORE.prt
!30-Jan-97 13:27:29  Start C:\PTC\demo\mfgintro17\CORE_WORK.prt
!30-Jan-97 13:27:33  End   C:\PTC\demo\mfgintro17\CORE_WORK.prt
!30-Jan-97 13:27:33  Start C:\PTC\demo\mfgintro17\VISE.prt
!30-Jan-97 13:27:33  End   C:\PTC\demo\mfgintro17\VISE.prt
!30-Jan-97 13:27:33  Start C:\PTC\demo\mfgintro17\BASE.prt
!30-Jan-97 13:27:37  End   C:\PTC\demo\mfgintro17\BASE.prt
!30-Jan-97 13:27:37  End   C:\PTC\demo\mfgintro17\HOUSING_CORE_MFG.asm
!30-Jan-97 13:27:37  Start C:\PTC\demo\mfgintro17\CSIZE.frm
!30-Jan-97 13:27:38  End   C:\PTC\demo\mfgintro17\CSIZE.frm
!30-Jan-97 13:27:38  End   C:\PTC\demo\mfgintro17\drill_core_fixture.drw.1
#MODE
#ASSEMBLY
#SEARCH/RETR
!Directory searched is: C:\PTC\demo\hset17
#/asm_dir
!Directory searched is: C:\PTC\demo\hset17\asm_dir
#head_set.asm
!30-Jan-97 13:27:57  Start C:\PTC\demo\hset17\asm_dir\head_set.asm.1
!30-Jan-97 13:27:58  Start C:\PTC\demo\hset17\asm_dir\ASM_HOUSING.prt
!30-Jan-97 13:27:59  End   C:\PTC\demo\hset17\asm_dir\ASM_HOUSING.prt
!30-Jan-97 13:27:59  Start C:\PTC\demo\hset17\asm_dir\BATTERY.prt
!30-Jan-97 13:27:59  End   C:\PTC\demo\hset17\asm_dir\BATTERY.prt
!30-Jan-97 13:27:59  Start C:\PTC\demo\hset17\asm_dir\FIN_BOARD.prt
!30-Jan-97 13:28:00  End   C:\PTC\demo\hset17\asm_dir\FIN_BOARD.prt
!30-Jan-97 13:28:00  Start C:\PTC\demo\hset17\asm_dir\OPAMP_M.prt
!30-Jan-97 13:28:00  End   C:\PTC\demo\hset17\asm_dir\OPAMP_M.prt
!30-Jan-97 13:28:00  Start C:\PTC\demo\hset17\asm_dir\PTC_CONN3.prt
!30-Jan-97 13:28:00  End   C:\PTC\demo\hset17\asm_dir\PTC_CONN3.prt
!30-Jan-97 13:28:00  Start C:\PTC\demo\hset17\asm_dir\RCR07_M.prt
!30-Jan-97 13:28:00  End   C:\PTC\demo\hset17\asm_dir\RCR07_M.prt
!30-Jan-97 13:28:00  Start C:\PTC\demo\hset17\asm_dir\RCR32_M.prt
!30-Jan-97 13:28:00  End   C:\PTC\demo\hset17\asm_dir\RCR32_M.prt
!30-Jan-97 13:28:00  Start C:\PTC\demo\hset17\asm_dir\PTC_RES150.prt
!30-Jan-97 13:28:01  End   C:\PTC\demo\hset17\asm_dir\PTC_RES150.prt
!30-Jan-97 13:28:01  Start C:\PTC\demo\hset17\asm_dir\MIXER_M.prt
!30-Jan-97 13:28:01  End   C:\PTC\demo\hset17\asm_dir\MIXER_M.prt
!30-Jan-97 13:28:01  Start C:\PTC\demo\hset17\asm_dir\PTC_DIP16.prt
!30-Jan-97 13:28:02  End   C:\PTC\demo\hset17\asm_dir\PTC_DIP16.prt
!30-Jan-97 13:28:02  Start C:\PTC\demo\hset17\asm_dir\PTC_STD128.prt
!30-Jan-97 13:28:02  End   C:\PTC\demo\hset17\asm_dir\PTC_STD128.prt
!30-Jan-97 13:28:02  Start C:\PTC\demo\hset17\asm_dir\WAVE_PLUG.prt
!30-Jan-97 13:28:03  End   C:\PTC\demo\hset17\asm_dir\WAVE_PLUG.prt
!30-Jan-97 13:28:03  Start C:\PTC\demo\hset17\asm_dir\KNOB.prt
!30-Jan-97 13:28:03  End   C:\PTC\demo\hset17\asm_dir\KNOB.prt
!30-Jan-97 13:28:03  Start C:\PTC\demo\hset17\asm_dir\SPRING.prt
!30-Jan-97 13:28:04  End   C:\PTC\demo\hset17\asm_dir\SPRING.prt
!30-Jan-97 13:28:04  Start C:\PTC\demo\hset17\asm_dir\ANTENNA.prt
!30-Jan-97 13:28:05  End   C:\PTC\demo\hset17\asm_dir\ANTENNA.prt
!30-Jan-97 13:28:05  Start C:\PTC\demo\hset17\asm_dir\EAR_PIECE.prt
!30-Jan-97 13:28:06  End   C:\PTC\demo\hset17\asm_dir\EAR_PIECE.prt
!30-Jan-97 13:28:06  Start C:\PTC\demo\hset17\asm_dir\EAR_SEAL.prt
!30-Jan-97 13:28:06  End   C:\PTC\demo\hset17\asm_dir\EAR_SEAL.prt
!30-Jan-97 13:28:06  Start C:\PTC\demo\hset17\asm_dir\BRIDGE.prt
!30-Jan-97 13:28:07  End   C:\PTC\demo\hset17\asm_dir\BRIDGE.prt
!30-Jan-97 13:28:07  Start C:\PTC\demo\hset17\asm_dir\MICROPHONE.prt
!30-Jan-97 13:28:07  End   C:\PTC\demo\hset17\asm_dir\MICROPHONE.prt
!30-Jan-97 13:28:07  Start C:\PTC\demo\hset17\asm_dir\EAR_PEICE_R.prt
!30-Jan-97 13:28:07  End   C:\PTC\demo\hset17\asm_dir\EAR_PEICE_R.prt
!30-Jan-97 13:28:09  End   C:\PTC\demo\hset17\asm_dir\head_set.asm.1
!Processing model HEAD_SET ...
!Processing model HOUSING_L ...
!Processing model ASM_HOUSING ...
!5% has been completed.
!10% has been completed.
!15% has been completed.
!20% has been completed.
!25% has been completed.
!30% has been completed.
!35% has been completed.
!40% has been completed.
!45% has been completed.
!50% has been completed.
!55% has been completed.
!60% has been completed.
!65% has been completed.
!70% has been completed.
!75% has been completed.
!80% has been completed.
!85% has been completed.
!90% has been completed.
!95% has been completed.
!100% has been completed.
!Processing model ELECTRONICS ...
!Processing model BATTERY ...
!5% has been completed.
!10% has been completed.
!15% has been completed.
!20% has been completed.
!25% has been completed.
!30% has been completed.
!35% has been completed.
!40% has been completed.
!45% has been completed.
!50% has been completed.
!55% has been completed.
!60% has been completed.
!65% has been completed.
!70% has been completed.
!75% has been completed.
!80% has been completed.
!85% has been completed.
!90% has been completed.
!95% has been completed.
!100% has been completed.
!Processing model PC_BOARD ...
!Processing model FIN_BOARD ...
!5% has been completed.
!10% has been completed.
!15% has been completed.
!20% has been completed.
!25% has been completed.
!30% has been completed.
!35% has been completed.
!40% has been completed.
!45% has been completed.
!50% has been completed.
!55% has been completed.
!60% has been completed.
!65% has been completed.
!70% has been completed.
!75% has been completed.
!80% has been completed.
!85% has been completed.
!90% has been completed.
!95% has been completed.
!100% has been completed.
!Processing model OPAMP_M ...
!20% has been completed.
!40% has been completed.
!60% has been completed.
!80% has been completed.
!100% has been completed.
!Processing model PTC_CONN3 ...
!5% has been completed.
!10% has been completed.
!15% has been completed.
!20% has been completed.
!25% has been completed.
!30% has been completed.
!35% has been completed.
!40% has been completed.
!45% has been completed.
!50% has been completed.
!55% has been completed.
!60% has been completed.
!65% has been completed.
!70% has been completed.
!75% has been completed.
!80% has been completed.
!85% has been completed.
!90% has been completed.
!95% has been completed.
!100% has been completed.
!Processing model RCR07_M ...
!15% has been completed.
!30% has been completed.
!50% has been completed.
!65% has been completed.
!80% has been completed.
!100% has been completed.
!Processing model RCR32_M ...
!15% has been completed.
!30% has been completed.
!50% has been completed.
!65% has been completed.
!80% has been completed.
!100% has been completed.
!Processing model PTC_RES150 ...
!5% has been completed.
!10% has been completed.
!15% has been completed.
!20% has been completed.
!25% has been completed.
!30% has been completed.
!35% has been completed.
!40% has been completed.
!45% has been completed.
!50% has been completed.
!55% has been completed.
!60% has been completed.
!65% has been completed.
!70% has been completed.
!75% has been completed.
!80% has been completed.
!85% has been completed.
!90% has been completed.
!95% has been completed.
!100% has been completed.
!Processing model MIXER_M ...
!15% has been completed.
!30% has been completed.
!50% has been completed.
!65% has been completed.
!80% has been completed.
!100% has been completed.
!Processing model PTC_DIP16 ...
!5% has been completed.
!10% has been completed.
!15% has been completed.
!20% has been completed.
!25% has been completed.
!30% has been completed.
!35% has been completed.
!40% has been completed.
!45% has been completed.
!50% has been completed.
!55% has been completed.
!60% has been completed.
!65% has been completed.
!70% has been completed.
!75% has been completed.
!80% has been completed.
!85% has been completed.
!90% has been completed.
!95% has been completed.
!100% has been completed.
!Processing model PTC_STD128 ...
!5% has been completed.
!10% has been completed.
!20% has been completed.
!25% has been completed.
!35% has been completed.
!40% has been completed.
!50% has been completed.
!55% has been completed.
!60% has been completed.
!70% has been completed.
!75% has been completed.
!85% has been completed.
!90% has been completed.
!100% has been completed.
!Processing model WAVE_PLUG ...
!5% has been completed.
!10% has been completed.
!15% has been completed.
!20% has been completed.
!25% has been completed.
!30% has been completed.
!35% has been completed.
!40% has been completed.
!45% has been completed.
!50% has been completed.
!55% has been completed.
!60% has been completed.
!65% has been completed.
!70% has been completed.
!75% has been completed.
!80% has been completed.
!85% has been completed.
!90% has been completed.
!95% has been completed.
!100% has been completed.
!Processing model KNOB ...
!5% has been completed.
!10% has been completed.
!15% has been completed.
!20% has been completed.
!25% has been completed.
!30% has been completed.
!35% has been completed.
!40% has been completed.
!45% has been completed.
!50% has been completed.
!55% has been completed.
!60% has been completed.
!65% has been completed.
!70% has been completed.
!75% has been completed.
!80% has been completed.
!85% has been completed.
!90% has been completed.
!95% has been completed.
!100% has been completed.
!Processing model SPRING ...
!5% has been completed.
!10% has been completed.
!15% has been completed.
!25% has been completed.
!30% has been completed.
!35% has been completed.
!40% has been completed.
!50% has been completed.
!55% has been completed.
!60% has been completed.
!65% has been completed.
!75% has been completed.
!80% has been completed.
!85% has been completed.
!90% has been completed.
!100% has been completed.
!Processing model ANTENNA ...
!5% has been completed.
!15% has been completed.
!20% has been completed.
!30% has been completed.
!35% has been completed.
!45% has been completed.
!50% has been completed.
!60% has been completed.
!65% has been completed.
!75% has been completed.
!80% has been completed.
!90% has been completed.
!100% has been completed.
!Processing model EAR_PIECE ...
!5% has been completed.
!10% has been completed.
!15% has been completed.
!20% has been completed.
!25% has been completed.
!30% has been completed.
!35% has been completed.
!40% has been completed.
!45% has been completed.
!50% has been completed.
!55% has been completed.
!60% has been completed.
!65% has been completed.
!70% has been completed.
!75% has been completed.
!80% has been completed.
!85% has been completed.
!90% has been completed.
!95% has been completed.
!100% has been completed.
!Processing model EAR_SEAL ...
!10% has been completed.
!25% has been completed.
!35% has been completed.
!50% has been completed.
!60% has been completed.
!75% has been completed.
!85% has been completed.
!100% has been completed.
!Processing model BRIDGE ...
!5% has been completed.
!10% has been completed.
!15% has been completed.
!20% has been completed.
!25% has been completed.
!30% has been completed.
!35% has been completed.
!40% has been completed.
!45% has been completed.
!50% has been completed.
!55% has been completed.
!60% has been completed.
!65% has been completed.
!70% has been completed.
!75% has been completed.
!80% has been completed.
!85% has been completed.
!90% has been completed.
!95% has been completed.
!100% has been completed.
!Processing model HOUSING_R ...
!Processing model ELECTRONICS ...
!Processing model PC_BOARD ...
!Processing model MICROPHONE ...
!5% has been completed.
!10% has been completed.
!15% has been completed.
!25% has been completed.
!30% has been completed.
!35% has been completed.
!40% has been completed.
!50% has been completed.
!55% has been completed.
!60% has been completed.
!65% has been completed.
!75% has been completed.
!80% has been completed.
!85% has been completed.
!90% has been completed.
!100% has been completed.
!Processing model EAR_PEICE_R ...
!5% has been completed.
!10% has been completed.
!15% has been completed.
!20% has been completed.
!25% has been completed.
!30% has been completed.
!35% has been completed.
!40% has been completed.
!45% has been completed.
!50% has been completed.
!55% has been completed.
!60% has been completed.
!65% has been completed.
!70% has been completed.
!75% has been completed.
!80% has been completed.
!85% has been completed.
!90% has been completed.
!95% has been completed.
!100% has been completed.
*SETUP_SPIN 1.000000 
*CTRL_MOUSE_M 1.000000 
*MOUSE_XROT 0.010336 MOUSE_YROT 0.053903 
*MOUSE_XROT -0.031009 MOUSE_YROT 0.066153 
*MOUSE_XROT -0.097162 MOUSE_YROT 0.063703 
*MOUSE_XROT -0.018606 MOUSE_YROT 0.068603 
*MOUSE_XROT -0.066153 MOUSE_YROT 0.034302 
*MOUSE_XROT -0.022740 MOUSE_YROT -0.396919 
*MOUSE_XROT 0.223267 MOUSE_YROT 0.039202 
*MOUSE_XROT 0.093028 MOUSE_YROT 0.298914 
*MOUSE_XROT -0.002067 MOUSE_YROT 0.034302 
*MOUSE_XROT -0.018606 MOUSE_YROT -0.232761 
*MOUSE_XROT 0.130239 MOUSE_YROT -0.301364 
*MOUSE_XROT 0.221199 MOUSE_YROT 0.117605 
*MOUSE_XROT 0.055817 MOUSE_YROT 0.200909 
*MOUSE_XROT -0.225334 MOUSE_YROT 0.289114 
*MOUSE_XROT -0.024807 MOUSE_YROT 0.100455 
*MOUSE_XROT -0.055817 MOUSE_YROT -0.166608 
*MOUSE_XROT -0.041346 MOUSE_YROT -0.173958 
*MOUSE_XROT 0.012404 MOUSE_YROT -0.134756 
*MOUSE_XROT 0.020673 MOUSE_YROT 0.022051 
*MOUSE_XROT -0.051682 MOUSE_YROT 0.046552 
*MOUSE_XROT -0.169517 MOUSE_YROT -0.296464 
*MOUSE_XROT 0.977825 MOUSE_YROT 0.063703 
*MOUSE_XROT -1.012969 MOUSE_YROT -0.088204 
*MOUSE_XROT -0.014471 MOUSE_YROT 0.362617 
*MOUSE_XROT -0.020673 MOUSE_YROT 0.230311 
*MOUSE_XROT -0.064086 MOUSE_YROT 0.061253 
*MOUSE_XROT -0.070288 MOUSE_YROT -0.117605 
*MOUSE_YROT -0.196009 
*MOUSE_XROT 0.047548 MOUSE_YROT -0.063703 
*MOUSE_XROT 0.074422 MOUSE_YROT -0.075954 
*MOUSE_XROT 0.039278 MOUSE_YROT -0.046552 
*MOUSE_XROT 0.053749 MOUSE_YROT -0.088204 
*MOUSE_XROT -0.241872 MOUSE_YROT -0.491248 
*MOUSE_XROT -0.064086 MOUSE_YROT 0.347916 
*MOUSE_XROT -0.279083 MOUSE_YROT 0.343016 
*MOUSE_XROT -0.070288 MOUSE_YROT -0.080854 
*MOUSE_XROT 0.103364 MOUSE_YROT -0.156807 
*MOUSE_XROT 0.059951 MOUSE_YROT 0.137206 
*MOUSE_XROT 0.010336 MOUSE_YROT 0.039202 
*MOUSE_XROT -0.004135 MOUSE_YROT -0.017151 
*CTRL_MOUSE_M -1.000000 
*CTRL_MOUSE_M 1.000000 
*MOUSE_XROT -0.004135 MOUSE_YROT -0.007350 
*MOUSE_XROT -0.022740 MOUSE_YROT -0.274413 
*MOUSE_XROT -0.242906 MOUSE_YROT -0.508399 
*MOUSE_XROT 0.055817 MOUSE_YROT 0.235211 
*MOUSE_XROT 0.055817 MOUSE_YROT 0.127406 
*MOUSE_XROT 0.037211 MOUSE_YROT 0.073503 
*MOUSE_YROT 0.127406 
*MOUSE_XROT -0.359707 MOUSE_YROT 0.102905 
*MOUSE_XROT -0.144710 MOUSE_YROT -0.026951 
*MOUSE_XROT 0.012404 MOUSE_YROT -0.063703 
*MOUSE_XROT 0.206728 MOUSE_YROT -0.034302 
*MOUSE_XROT 0.155046 MOUSE_YROT -0.171508 
*MOUSE_XROT 0.014471 MOUSE_YROT -0.245011 
*MOUSE_XROT 0.031009 MOUSE_YROT 0.044102 
*MOUSE_XROT 0.010336 MOUSE_YROT 0.115155 
*MOUSE_XROT 0.006202 MOUSE_YROT -0.019601 
*CTRL_MOUSE_M -1.000000 
*SETUP_SPIN -1.000000 
#QUIT WINDOW
#PART
#SEARCH/RETR
!Directory searched is: C:\PTC\demo\hset17
#housing.prt
!30-Jan-97 13:28:41  Start C:\PTC\demo\hset17\housing.prt.1
!Regeneration completed successfully.
!30-Jan-97 13:28:41  End   C:\PTC\demo\hset17\housing.prt.1
!Processing model HOUSING ...
#QUIT WINDOW
#PART
#SEARCH/RETR
!Directory searched is: C:\PTC\demo\hset17
#mfg_stock.prt
!30-Jan-97 13:29:03  Start C:\PTC\demo\hset17\mfg_stock.prt.1
!30-Jan-97 13:29:03  End   C:\PTC\demo\hset17\mfg_stock.prt.1
!Processing model MFG_STOCK ...
!15% has been completed.
!30% has been completed.
!50% has been completed.
!65% has been completed.
!80% has been completed.
!100% has been completed.
*SETUP_SPIN 1.000000 
*CTRL_MOUSE_M 1.000000 
*MOUSE_XROT -0.002067 MOUSE_YROT 0.009800 
*MOUSE_XROT -0.004135 MOUSE_YROT 0.014701 
*MOUSE_XROT -0.002067 MOUSE_YROT 0.004900 
*MOUSE_XROT -0.002067 MOUSE_YROT 0.017151 
*MOUSE_YROT 0.007350 
*MOUSE_XROT -0.002067 MOUSE_YROT 0.012251 
*MOUSE_XROT -0.002067 MOUSE_YROT 0.017151 
*MOUSE_XROT -0.010336 MOUSE_YROT 0.019601 
*MOUSE_XROT -0.014471 MOUSE_YROT 0.019601 
*MOUSE_XROT -0.018606 MOUSE_YROT 0.022051 
*MOUSE_XROT -0.008269 MOUSE_YROT 0.007350 
*MOUSE_XROT -0.010336 MOUSE_YROT 0.009800 
*MOUSE_XROT -0.002067 MOUSE_YROT 0.004900 
*MOUSE_XROT -0.004135 MOUSE_YROT -0.002450 
*MOUSE_XROT -0.008269 MOUSE_YROT -0.009800 
*MOUSE_XROT -0.049615 MOUSE_YROT -0.058803 
*MOUSE_XROT -0.008269 MOUSE_YROT -0.049002 
*MOUSE_YROT -0.039202 
*MOUSE_XROT 0.004135 MOUSE_YROT -0.014701 
*MOUSE_XROT 0.012404 MOUSE_YROT -0.102905 
*MOUSE_XROT 0.059951 MOUSE_YROT -0.137206 
*MOUSE_XROT 0.028942 
*MOUSE_XROT 0.227401 MOUSE_YROT 0.063703 
*MOUSE_XROT 0.041346 MOUSE_YROT 0.012251 
*MOUSE_XROT 0.008269 MOUSE_YROT 0.147007 
*MOUSE_XROT -0.004135 MOUSE_YROT 0.039202 
*MOUSE_XROT -0.020673 MOUSE_YROT 0.029401 
*MOUSE_XROT -0.132306 MOUSE_YROT 0.049002 
*MOUSE_XROT -0.006202 MOUSE_YROT 0.002450 
*MOUSE_YROT -0.002450 
*MOUSE_YROT -0.002450 
*MOUSE_YROT -0.017151 
*MOUSE_XROT -0.002067 MOUSE_YROT -0.012251 
*MOUSE_XROT -0.012404 MOUSE_YROT -0.022051 
*MOUSE_XROT -0.020673 MOUSE_YROT -0.004900 
*MOUSE_XROT -0.002067 
*MOUSE_XROT 0.006202 
*MOUSE_XROT 0.080624 
*MOUSE_XROT -0.008269 MOUSE_YROT -0.002450 
*MOUSE_XROT -0.018606 MOUSE_YROT -0.004900 
*MOUSE_XROT -0.086826 MOUSE_YROT -0.014701 
*MOUSE_XROT -0.028942 MOUSE_YROT -0.007350 
*MOUSE_XROT -0.002067 MOUSE_YROT -0.012251 
*MOUSE_XROT 0.004135 MOUSE_YROT -0.004900 
*MOUSE_XROT 0.006202 MOUSE_YROT -0.009800 
*MOUSE_XROT 0.004135 MOUSE_YROT -0.007350 
*MOUSE_YROT 0.002450 
*MOUSE_XROT 0.002067 MOUSE_YROT 0.007350 
*MOUSE_XROT 0.002067 MOUSE_YROT 0.009800 
*CTRL_MOUSE_M -1.000000 
*CTRL_MOUSE_L 1.000000 
*DYNAMIC_ZOOM_1 0.002067 DYANMIC_ZOOM_2 0.007350 
*DYANMIC_ZOOM_2 0.007350 
*DYNAMIC_ZOOM_1 0.002067 DYANMIC_ZOOM_2 0.009800 
*DYANMIC_ZOOM_2 0.002450 
*DYNAMIC_ZOOM_1 0.002067 DYANMIC_ZOOM_2 -0.017151 
*DYNAMIC_ZOOM_1 0.004135 DYANMIC_ZOOM_2 -0.102905 
*DYANMIC_ZOOM_2 -0.063703 
*DYANMIC_ZOOM_2 -0.166608 
*DYANMIC_ZOOM_2 -0.220510 
*DYNAMIC_ZOOM_1 -0.258411 DYANMIC_ZOOM_2 -0.508399 
*DYANMIC_ZOOM_2 0.122506 
*DYANMIC_ZOOM_2 0.068603 
*DYNAMIC_ZOOM_1 -0.002067 DYANMIC_ZOOM_2 0.235211 
*DYNAMIC_ZOOM_1 -0.006202 DYANMIC_ZOOM_2 0.147007 
*DYNAMIC_ZOOM_1 -0.002067 DYANMIC_ZOOM_2 0.046552 
*DYANMIC_ZOOM_2 0.014701 
*DYANMIC_ZOOM_2 0.053903 
*DYNAMIC_ZOOM_1 -0.006202 DYANMIC_ZOOM_2 0.191109 
*DYNAMIC_ZOOM_1 -0.002067 DYANMIC_ZOOM_2 0.004900 
*DYNAMIC_ZOOM_1 -0.022740 DYANMIC_ZOOM_2 0.024501 
*DYNAMIC_ZOOM_1 -0.008269 DYANMIC_ZOOM_2 -0.024501 
*DYNAMIC_ZOOM_1 -0.010336 DYANMIC_ZOOM_2 -0.022051 
*DYNAMIC_ZOOM_1 -0.014471 DYANMIC_ZOOM_2 -0.066153 
*DYNAMIC_ZOOM_1 0.008269 DYANMIC_ZOOM_2 0.053903 
*CTRL_MOUSE_L -1.000000 
*CTRL_MOUSE_M 1.000000 
*MOUSE_XROT 0.002067 MOUSE_YROT -0.002450 
*MOUSE_XROT 0.002067 MOUSE_YROT -0.014701 
*MOUSE_XROT 0.051682 MOUSE_YROT -0.117605 
*MOUSE_XROT 0.066153 MOUSE_YROT -0.049002 
*MOUSE_XROT 0.033077 MOUSE_YROT -0.034302 
*MOUSE_XROT 0.012404 MOUSE_YROT -0.012251 
*MOUSE_XROT 0.053749 MOUSE_YROT -0.051452 
*MOUSE_XROT 0.002067 
*MOUSE_XROT 0.004135 
*MOUSE_XROT 0.002067 MOUSE_YROT 0.014701 
*MOUSE_XROT -0.008269 MOUSE_YROT 0.068603 
*MOUSE_XROT -0.024807 MOUSE_YROT 0.061253 
*MOUSE_XROT -0.016538 MOUSE_YROT 0.029401 
*MOUSE_XROT -0.002067 MOUSE_YROT 0.009800 
*MOUSE_XROT -0.002067 MOUSE_YROT 0.009800 
*MOUSE_XROT 0.008269 MOUSE_YROT 0.075954 
*MOUSE_XROT -0.008269 MOUSE_YROT -0.068603 
*CTRL_MOUSE_M -1.000000 
*SETUP_SPIN -1.000000 
#QUIT WINDOW
#ASSEMBLY
#RETRIEVE
!Enter Assembly name  [HEAD_SET]: 

!Processing model HEAD_SET ...
!Processing model HOUSING_L ...
!Processing model ELECTRONICS ...
!Processing model PC_BOARD ...
!Processing model HOUSING_R ...
!Processing model ELECTRONICS ...
!Processing model PC_BOARD ...
*SETUP_SPIN 1.000000 
*CTRL_MOUSE_M 1.000000 
*MOUSE_XROT -0.002067 MOUSE_YROT 0.039202 
*MOUSE_XROT -0.008269 MOUSE_YROT 0.088204 
*MOUSE_XROT -0.053749 MOUSE_YROT 0.041652 
*MOUSE_XROT -0.059951 MOUSE_YROT 0.159257 
*MOUSE_XROT -0.031009 MOUSE_YROT -0.222960 
*MOUSE_XROT 0.016538 MOUSE_YROT -0.301364 
*MOUSE_XROT 0.496148 MOUSE_YROT 0.242561 
*MOUSE_XROT -0.016538 MOUSE_YROT 0.026951 
*MOUSE_XROT -0.186056 MOUSE_YROT -0.543925 
*MOUSE_XROT -0.082691 MOUSE_YROT 0.058803 
*MOUSE_XROT -0.190190 MOUSE_YROT 0.240111 
*MOUSE_XROT -0.076490 MOUSE_YROT 0.151907 
*MOUSE_XROT 0.359707 MOUSE_YROT 0.034302 
*MOUSE_XROT 0.198459 MOUSE_YROT 0.139657 
*MOUSE_XROT -0.345236 MOUSE_YROT 0.085754 
*MOUSE_XROT -0.115768 MOUSE_YROT -0.259712 
*MOUSE_XROT 0.047548 MOUSE_YROT -0.230311 
*MOUSE_XROT -0.080624 MOUSE_YROT -0.078404 
*MOUSE_XROT 0.031009 MOUSE_YROT 0.539025 
*MOUSE_XROT 0.214998 MOUSE_YROT 0.031851 
*MOUSE_XROT -0.012404 MOUSE_YROT -0.641930 
*MOUSE_XROT -0.024807 MOUSE_YROT -0.090654 
*MOUSE_XROT -0.062019 MOUSE_YROT 0.294014 
*MOUSE_XROT -0.024807 MOUSE_YROT 0.100455 
*MOUSE_XROT -0.024807 MOUSE_YROT 0.056353 
*MOUSE_XROT -0.024807 MOUSE_YROT 0.051452 
*MOUSE_XROT -0.016538 MOUSE_YROT 0.041652 
*MOUSE_XROT -0.035144 MOUSE_YROT 0.017151 
*CTRL_MOUSE_M -1.000000 
*CTRL_MOUSE_L 1.000000 
*DYNAMIC_ZOOM_1 0.002067 
*DYNAMIC_ZOOM_1 0.016538 DYANMIC_ZOOM_2 0.269513 
*DYANMIC_ZOOM_2 0.026951 
*DYNAMIC_ZOOM_1 -0.039278 DYANMIC_ZOOM_2 -0.213160 
*DYNAMIC_ZOOM_1 -0.012404 DYANMIC_ZOOM_2 -0.193559 
*DYNAMIC_ZOOM_1 -0.002067 DYANMIC_ZOOM_2 -0.218060 
*DYNAMIC_ZOOM_1 0.078557 DYANMIC_ZOOM_2 -0.078404 
*DYNAMIC_ZOOM_1 0.454802 DYANMIC_ZOOM_2 0.142107 
*DYNAMIC_ZOOM_1 0.148844 DYANMIC_ZOOM_2 0.115155 
*DYNAMIC_ZOOM_1 -0.183988 DYANMIC_ZOOM_2 0.115155 
*DYNAMIC_ZOOM_1 0.113701 DYANMIC_ZOOM_2 -0.036752 
*CTRL_MOUSE_L -1.000000 
*CTRL_MOUSE_M 1.000000 
*MOUSE_XROT -0.004135 MOUSE_YROT 0.009800 
*MOUSE_XROT -0.076490 MOUSE_YROT 0.046552 
*MOUSE_XROT -0.066153 MOUSE_YROT -0.132306 
*MOUSE_XROT 0.107499 MOUSE_YROT -0.191109 
*MOUSE_XROT 0.281151 MOUSE_YROT -0.007350 
*MOUSE_XROT -0.124037 MOUSE_YROT -0.083304 
*MOUSE_XROT -0.281151 MOUSE_YROT 0.049002 
*MOUSE_XROT 0.004135 MOUSE_YROT 0.347916 
*MOUSE_XROT 0.072355 MOUSE_YROT 0.156807 
*MOUSE_XROT 0.008269 MOUSE_YROT 0.012251 
*MOUSE_XROT -0.010336 MOUSE_YROT -0.191109 
*MOUSE_XROT 0.128172 MOUSE_YROT -0.237661 
*MOUSE_XROT 0.440332 MOUSE_YROT 0.066153 
*MOUSE_XROT -0.014471 MOUSE_YROT 0.014701 
*MOUSE_XROT -0.124037 MOUSE_YROT 0.009800 
*CTRL_MOUSE_M -1.000000 
*CTRL_MOUSE_R 1.000000 
*HORIZ 0.002067 VERT -0.002450 
*VERT -0.031851 
*HORIZ -0.004135 VERT -0.213160 
*HORIZ 0.004135 VERT -0.098005 
*HORIZ -0.150912 VERT 0.088204 
*HORIZ -0.175719 VERT 0.203359 
*HORIZ 0.103364 VERT 0.343016 
*HORIZ 0.169517 VERT 0.014701 
*HORIZ 0.066153 VERT -0.012251 
*HORIZ 0.202594 VERT -0.029401 
*HORIZ 0.024807 VERT 0.004900 
*HORIZ -0.130239 VERT -0.088204 
*HORIZ -0.196392 VERT -0.024501 
*HORIZ -0.237738 VERT -0.455721 
*HORIZ -0.031009 VERT -0.112705 
*HORIZ -0.086826 VERT 0.024501 
*HORIZ 0.097162 VERT 0.124956 
*HORIZ 0.097162 VERT 0.029401 
*HORIZ 0.119902 VERT 0.198459 
*HORIZ 0.024807 VERT 0.063703 
*HORIZ 0.020673 VERT 0.029401 
*HORIZ -0.004135 VERT -0.007350 
*CTRL_MOUSE_R -1.000000 
*CTRL_MOUSE_M 1.000000 
*MOUSE_XROT -0.002067 
*MOUSE_XROT -0.024807 MOUSE_YROT -0.073503 
*MOUSE_XROT 0.198459 MOUSE_YROT -0.328315 
*MOUSE_XROT 0.322496 MOUSE_YROT 0.004900 
*MOUSE_XROT -0.008269 MOUSE_YROT 0.049002 
*MOUSE_XROT -0.601580 MOUSE_YROT 0.338116 
*MOUSE_XROT 0.053749 MOUSE_YROT 0.102905 
*MOUSE_XROT 0.169517 MOUSE_YROT 0.012251 
*MOUSE_XROT -0.004135 MOUSE_YROT 0.002450 
*CTRL_MOUSE_M -1.000000 
*SETUP_SPIN -1.000000 
*SETUP_SPIN 1.000000 
*CTRL_MOUSE_M 1.000000 
*MOUSE_XROT 0.115768 MOUSE_YROT 0.090654 
*MOUSE_XROT -0.146777 MOUSE_YROT -0.306264 
*MOUSE_XROT -0.002067 MOUSE_YROT -0.068603 
*MOUSE_XROT -0.002067 MOUSE_YROT 0.044102 
*MOUSE_XROT 0.006202 MOUSE_YROT 0.034302 
*MOUSE_YROT 0.014701 
*MOUSE_XROT 0.002067 MOUSE_YROT -0.007350 
*CTRL_MOUSE_M -1.000000 
*CTRL_MOUSE_L 1.000000 
*DYNAMIC_ZOOM_1 0.002067 DYANMIC_ZOOM_2 0.007350 
*DYNAMIC_ZOOM_1 0.008269 DYANMIC_ZOOM_2 0.232761 
*DYNAMIC_ZOOM_1 0.014471 DYANMIC_ZOOM_2 0.254812 
*DYNAMIC_ZOOM_1 0.002067 DYANMIC_ZOOM_2 0.029401 
*DYNAMIC_ZOOM_1 -0.002067 DYANMIC_ZOOM_2 -0.004900 
*DYNAMIC_ZOOM_1 -0.024807 DYANMIC_ZOOM_2 -0.115155 
*DYNAMIC_ZOOM_1 -0.008269 DYANMIC_ZOOM_2 -0.318515 
*DYNAMIC_ZOOM_1 0.010336 DYANMIC_ZOOM_2 -0.213160 
*DYNAMIC_ZOOM_1 0.006202 DYANMIC_ZOOM_2 -0.132306 
*DYNAMIC_ZOOM_1 0.004135 DYANMIC_ZOOM_2 -0.093104 
*CTRL_MOUSE_L -1.000000 
*SETUP_SPIN -1.000000 
#QUIT WINDOW
#PART
413.3swap boards between Kaui and VectraHYDRA::DONSBACHJeff Donsbach, Software Partner Engineering, DTN 297-6862Fri Feb 07 1997 13:447
    
    Did you try swapping graphics boards and drivers between the Kaui and
    the HP Vectra? Might be worth a try to narrow it down to a problem
    AccelGraphics would own.
    
    -Jeff
413.4ALLVAX::STAATST is for ToddFri Feb 07 1997 15:086
    it was my impression that the driver on the 
    
    http://www.service.digital.com page referred to in .2
    was for Alpha NT only, not for the intel based 200i?
    
    todd///
413.5phooeyWRKSYS::CHALTASSex, Drugs & OperaFri Feb 07 1997 16:453
    Crud -- Todd is right -- I've deleted the note.
    
    George
413.6HP ok, PWSi notOSLLAV::JENSHJens Holwech, SI Technology Group, Norway (DTN 872-8543)Wed Feb 12 1997 06:1216
Re. .3:

The initial comparison with the HP Vectra was done in PTC's booth
at a trade show: not the ideal place to start switching cards...

Now I've tried it, and we're still the bad guys. The functioning 
AccelPRO 2500TX from the Vectra machine reliably duplicates
the original hangs on the Kauai. I was unable to try the AccelPRO
2000 under NT 4.0 in the Vectra, but it works ok with 3.51 (not
identical drivers, though). I don't care too much about 3.51, but
I sure would like this problem to go away for 4.0.

Should I let MCS submit an official bug-report for this?

Regards,
Jens
413.7try this new driverHYDRA::DONSBACHJeff Donsbach, Software Partner Engineering, DTN 297-6862Wed Feb 12 1997 14:039
    
    There is an Intel 4.1.10 driver for NT 4.0 Intel at
    www.service.digital.com.
    
    Get that and then try it. Supposedly, the 4.1.10 driver fixes some
    PCI bus timing issues that may be unique to Kauai.
    
    -Jeff
413.8New driver fixes issue!OSLLAV::JENSHJens Holwech, SI Technology Group, Norway (DTN 872-8543)Fri Feb 14 1997 05:4512
Re .7:

Yes, this driver fixes the problem, along with similar symptoms seen
when defining colors.

I just learned that PTC are still promoting NT 3.51 as a "more stable
platform" than 4.0. The reason is that they've had some problems with 
PDM access using 4.0. Sorry, I don't have any details on this. Is 
this a familiar statement, or should I probe further into the 
specifics?

Jens
413.9a likely story...HYDRA::DONSBACHJeff Donsbach, Software Partner Engineering, DTN 297-6862Mon Feb 17 1997 17:1213
 >   I just learned that PTC are still promoting NT 3.51 as a "more stable
 >   platform" than 4.0. The reason is that they've had some problems with
 >   PDM access using 4.0. Sorry, I don't have any details on this. Is
 >   this a familiar statement, or should I probe further into the
 >   specifics?
    
    I hadn't heard this, but it wouldn't surprise me. PTC is very
    conservative about recommending new OS's, compilers, etc.
    Though, if there are THAT many problems, I don't think they should
    have certified NT 4.0! (IMHO)
    
    -Jeff D.