| Title: | DECpc _Portables |
| Moderator: | PCBUOA::GLANTZ |
| Created: | Wed May 08 1991 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 2423 |
| Total number of notes: | 11059 |
Hi, I have NT4 SP2 installed on my Hinote UltraII LTS5133 (BIOS ver. 2.10). Power management is working fine except that whenever the machine goes into power save mode my network doesn't wake again and I have to do a shutdown and restart to get it going again. This is realy starting to irritate me. Is somebody working on a solution? I'm experiencing the problem with both the Xircom CEM28.8 and the CEM33? Thanks for any replies. Nico
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2337.1 | same problem as my previous note? | NETRIX::"[email protected]" | Martin Kuhne | Mon Mar 17 1997 07:15 | 10 |
This could be the same hal.dll problem as in my previous note. Try uninstalling service pack 2, then re-install power management. regards, Martin CSC Munich DTN 865-1471 [Posted by WWW Notes gateway] | |||||
| 2337.2 | I have the correct HAL.DLL | JOBURG::NICOP | Nico Pretorius | Mon Mar 17 1997 08:13 | 15 |
Martin, My power management works fine. The battery meter works fine and if I do a shutdown it powers off. I did the power management installation after I installed SP2 and then replaced NTDETECT.COM as mentioned in note 2289.2. I have similar partions to that mentioned in the note. Also I compared my HAL.DLL with the SP2 HAL's and it doesn't match which means I have the one from the EPM kit installed. Does yours work fine now with your VP500? Regards Nico | |||||