| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 2332.1 | Suggestion | PCBUOA::GLANTZ | | Fri Mar 14 1997 16:01 | 5 |
| You must re-install most drivers, especially the the power management
driver, after upgrading to SP2.
Do you have a clean version of SP2? Microsoft's Web server had a
faulty copy posted until February; however, the CD-ROM is clean.
|
| 2332.2 | hal conflict? | NETRIX::"[email protected]" | Martin Kuhne | Mon Mar 17 1997 03:19 | 20 |
| > You must re-install most drivers, especially the the power management
> driver, after upgrading to SP2.
Thanks for the quick reply...
The power management drivers supply a new hal.dll (hardware
abstraction layer) probably because nt does not support
power management by itself.
SP2 updates this hal.dll also. With sp2's hal installed, there
is no power management. With sp2 and the power managemet's hal,
the system hangs when rebooting.
Time for an IPMT?
Martin
CSC Munich
DTN 865-1471
[Posted by WWW Notes gateway]
|
| 2332.3 | Xircom driver is not a stranger | BACHUS::DEKEYSER | TP/IM CSC - Belgium DTN 856-8779 | Mon Mar 17 1997 05:26 | 8 |
| Martin,
If this is the same system as the previous note with the xircom card,
the hang happens because you have this xircom driver with epm installed.
I had the same problem on my system and i decided to use my system without epm.
The other thing I have now is that a shutdown initiates automatically a reboot.
Rudi
|
| 2332.4 | xircon driver the problem? | NETRIX::"[email protected]" | Martin Kuhne | Mon Mar 17 1997 07:30 | 8 |
| Yes, it's several problems on the same system.
So you think it's the xircom driver...
any help? driver downgrade?
Anyone running a DEPCM or any other PCMCIA NIC with winnt 4.0
service pack 2 and power management installed?
[Posted by WWW Notes gateway]
|
| 2332.5 | xircon driver the problem? | NETRIX::"[email protected]" | Martin Kuhne | Mon Mar 17 1997 07:30 | 13 |
| Yes, it's several problems on the same system.
So you think it's the xircom driver...
any help? driver downgrade?
Anyone running a DEPCM or any other PCMCIA NIC with winnt 4.0
service pack 2 and power management installed?
regards
Martin
CSC Munich
DTN 865-1471
[Posted by WWW Notes gateway]
|
| 2332.6 | pcmcia.sys ? | DECPRG::PRSS2::csfr::markus | | Mon Apr 07 1997 08:09 | 87 |
| Hi Martin,
I do not know if my reply is relevant to the VP but maybe it is.
It is also some kind of reaction to 2272.1.
I downloaded the new Xircom drivers for the CEM28 (March 97) and
reinstalled Xircom adapter on my Hinote Ultra II (SP2 and reinstalled MM
and EPM support).
Since this change I wasn't able correctly shutdown WNT (the computer just
hang with screen Saving data .... and I had to manually switch the computer
of and on again. The secondary effect was that CHKDSK was run on each
startup of the computer and sometimes reported wrong files.
After a little homework I looked to the MS Technet (see attached). So I
changed pcmcia.sys from our MM and EPM kit to the same file from NT SP2.
Now I can shutdown correctly and my power management (at least what I have
tried) works O.K.
Since the Xircom driver is probably the same also for CEM33 I would expect
that this note could be also valid for that adapter.
Another story is new Xircom driver and PW32.
Jiri Markus
Technology consultant
Prague
PSS ID Number: Q108261
Article last modified on 02-01-1997
PSS database name: WINNT
3.51 4.00
WINDOWS
--------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Windows NT Workstation versions 3.51 and 4.0
- Microsoft Windows NT Server versions 3.51 and 4.0
--------------------------------------------------------------------------
SYMPTOMS
========
Windows NT fails to shutdown correctly on some computers that have PCMCIA
devices installed.
RESOLUTION
==========
Obtain the following update or wait for the next Service Pack.
A modified PCMCIA driver for Windows NT, and instructions for installing
them, are available from Microsoft support channels or directly from the
following Internet locations:
For Windows NT 3.51:
ftp://ftp.microsoft.com/bussys/winnt/winnt-public/fixes/usa/NT351
/hotfixes-postSP5/pcmcia-fix
For Windows NT 4.00:
ftp://ftp.microsoft.com/bussys/winnt/winnt-public/fixes/usa/nt40
/hotfixes-postSP1/pcmcia-fix
STATUS
======
Microsoft has confirmed this to be a problem in Windows NT versions 3.51
and 4.0. This problem was corrected in the latest Microsoft Windows NT 4.0
U.S. Service Pack. For information on obtaining the service pack, query on
the following word in the Microsoft Knowledge Base (without the spaces):
S E R V P A C K
KBCategory: kbsetup kbbug3.51 kbbug4.00 kbfix3.51 kbfix4.00.sp2
KBSubcategory: ntdriver nthw
Additional reference words: prodnt 4.00 3.51
===========================================================================
==
Copyright Microsoft Corporation 1997.
|