| Title: | Please read note 1.0 ELP::OSI_APPL_SUPPORT |
| Notice: | Please read note 1.0 |
| Moderator: | DRAGNS::MILLER COM::S_WATTUM |
| Created: | Mon Aug 30 1993 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 516 |
| Total number of notes: | 2729 |
HI!
I got some problem with accessing files on Ericcson GSM switch
with FTAM from DUNIX 3.2G via X.25 PSDN.
I found some reasonable error messages only by CTF.
If somebody can analyze this trace or have some idea what I can
change on my node to get things work. Please HELP.
Gabriel
PS: This trace was sent to Ericcson SW engineering to.
-----------+----+-----+<-------------------Transport-Header---------------------->+------------------------------------------------
Rem Time |Evnt|Data | |DATA
hh:mm:ss.ms| |Size | |
-----------+----+-----+<--------------------------------------------------------->+------------------------------------------------
12:45:18.55| Tx| 40| Type: CR Length: 27 |
| Li: 1A, Credit: 00 |
| Source Ref: 0000, Destination Ref: 019C, TC_id: 019C |
| Class 2, Extended |
| Remote NSAP: 3600000107010546 |
| Variable Part: |
| (C6) Additional Options: 01 |
| Use of transport expedited data transfer service |
| 16-bit checksum used in class 4 |
| Use of explicit ack variant in class 1 |
| Non-use of network expedited in class 1 |
| Non-use of selective ack in class 4 |
| (C7) Alternative Protocol Class(es): |
| 00 |
| (C0) Tpdu Size: 2048 |
| (F0) Preferred Tpdu Size: 2048 |
| (C1) Src TSAP Id: 0001 |
| (C2) Dst TSAP Id: 0034 |
| |
| |
12:45:18.62|Rx | 39| Type: ER Length: 26 |
| Li: 19 |
| Destination Ref: 019C, TC_id: 0000 |
| Class: 2, Extended |
| Remote NSAP: 3600000107010546 |
| Cause: 01 - Invalid parameter code |
| Variable Part: |
| (C1) Invalid TPDU: |
| 1A E0 00 00 01 9C 22 C6 01 01 C7 01 00 C0 01 0B F0 01 10|
| |
================================End of trace=====================================================================
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 511.1 | RMULAC.DVO.DEC.COM::S_WATTUM | Scott Wattum - FTAM/VT/OSAK Engineering | Thu Apr 24 1997 10:31 | 5 | |
The switch may not support tp2, try tp0. They may not support prefered maximum TPDU size, try setting that false on the template you are using. Same for Send Implementation Ident and Extended Format (as I recall, a lot of these don't apply to TP0, so try them if you want to play with a tp2 connection). | |||||
| 511.2 | FORTY2::DALLAS | Paul Dallas, DEC/EDI @REO2-F/E2 | Fri Apr 25 1997 05:04 | 3 | |
Also, I don't think you can specify BOTH use-of-transport-expedited and
TP0 as an alternate. Try setting the outbound template to TP4/TP2 only
or switch transport expedited off.
| |||||
| 511.3 | Thanks! | BRADEC::BALOGH | Gabriel Balogh @BRC | Fri Apr 25 1997 08:12 | 12 |
Hi!
Thank you for quick response.
I have tried with every params set to flase, but with {0, 2}.
After your reply I set every thing to false and to tp0.
It seems to works O.K.
Thanks !
Gabriel
| |||||