| Title: | Doom - The Game |
| Notice: | Doom stuff - see 183 Out of HOURS Access |
| Moderator: | BAHTAT::HILTON |
| Created: | Tue Jun 14 1994 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 212 |
| Total number of notes: | 3287 |
I recently upgraded my p-90 that had both pci and vesa-vlb slots and my
doom2 v1.7 went from 22.4 to 49.4 the only change was the motherboard
and disk controller. The motherbaord is a ASUS brand w/256k pipline
cache and the triton chipset.
old system
24meg ram,256k cache ,pci tseng et400w32p/2 meg dram pci/vlb mb=22.4
fps
new system
24meg ram,256k pipline cache,pci tseng et4000w32p/2 meg dram pci mb=
49.4 fps
Regards, Robert
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 201.1 | REOSV4::grantt.reo.dec.com::Taylorgr | Wed May 28 1997 07:51 | 20 | ||
I have also just upgraded my system from a DECpc XL5120 with 48MB of FPM RAM and a Matrox Millenium w/4MB WRAM. The disks I use are SCSI and hang off the on-board NCR810 PCI SCSI controller. The old system was 41 fps And the new system is based on a Tyan Tomcat IIIS motherboard wit 512k Pipeline burst cache with an Adaptec 2940 Ultra SCSI controller. The disks/CPU/Memory and video card are carried over from the XL5120, The performance of the new system is 57 fps and could be better if I used EDO memory instead of the 70ns FPM RAM that I'm using. Grant | |||||