[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference iosg::all-in-1_v30

Title:*OLD* ALL-IN-1 (tm) Support Conference
Notice:Closed - See Note 4331.l to move to IOSG::ALL-IN-1
Moderator:IOSG::PYE
Created:Thu Jan 30 1992
Last Modified:Tue Jan 23 1996
Last Successful Update:Fri Jun 06 1997
Number of topics:4343
Total number of notes:18308

4202.0. "oa$site_dev logicals incorrectly defined..." by TAV02::CHAIM (Semper ubi Sub ubi .....) Wed May 25 1994 15:48

ALL-IN-1 V3.0-1	

At a customer site the oa$site_dev_share and oa$site_dev_llv logicals are not
being defined correctly. The information in A1CONFIG.DAT is correct.

I have looked in a1v30start.com and I see where symbols oa$sdev_share and
oa$sdev_llv are defined. Using SET VER these sysmbols are apparently being set
properly. 

What I don't seem to see is what the startup does with these symbols once they
are set. I don't see where the actual oa$site_dev_share/llv logicals are
defined.

Thanks,

Cb.
T.RTitleUserPersonal
Name		DateLines
4202.1CM$AUTH$LOCATIONSIOSG::BILSBOROUGHSWBFSWed May 25 1994 16:219
    
    Have they just moved there ALL-IN-1 system around?
    
    The logicals are defined in the dataset CM$AUTH$LOCATIONS, accessible
    via AM MAL
    
    ta,
    
    Mike
4202.2UTRTSC::SCHOLLAERTOffice WEBmasterWed May 25 1994 16:3522
    from STARS:
    
How To Change The Values Of The Area CM Site Logicals                         
                                                                              
To change the logicals for an application area, go to the Manage              
Applications menu (MGT CSZ MA) and SELect the Application and                 
Application Area.  Edit the application area (EA).  The Master Area           
File form will display.  Since these fields are not enterable on the          
form, to change them Press {GOLD KP7} and at the command prompt type:         
                                                                              
  GET ROOTCODE="new value"                                                    
                                                                              
This will change the 'Base Root Directory' field.                             
                                                                              
Press {KP 7} and at the command prompt type:                                  
                                                                              
  GET SITEROOTCODE="new value"                                                
                                                                              
This will change the 'Site Base Root Directory' field.                        
                                                                              
These steps must be performed for both the ENGLISH and SHARE areas for        
the OA application.
4202.3AIMTEC::WICKS_AAtlanta's Most (In)famous WelshmanWed May 25 1994 17:586
    re .1,
    
    Actually Jan there's a much better article entitled
    ALL-IN-1 V3.0: Documentation Incomplete for Moving ALL-IN-1 Area  
    
    Andrew.D.Wicks