[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference iosg::all-in-1_v30

Title:*OLD* ALL-IN-1 (tm) Support Conference
Notice:Closed - See Note 4331.l to move to IOSG::ALL-IN-1
Moderator:IOSG::PYE
Created:Thu Jan 30 1992
Last Modified:Tue Jan 23 1996
Last Successful Update:Fri Jun 06 1997
Number of topics:4343
Total number of notes:18308

3743.0. "Full DECnet/OSI (Phase V) support?" by HACMAN::HACK (Don Hack, Digital Consulting) Fri Jan 07 1994 06:41

    Are there any known reasons why ALL-IN-1 will not work in a DECnet/OSI
    VAXcluster?  Particularly, Wave 3.
    
    Thanks ... Don
T.RTitleUserPersonal
Name		DateLines
3743.1Maybe the problems would be due MailbusVELI::KORKKOGeneral nuisance...Fri Jan 07 1994 11:1328
        ALL-IN-1 seems to work just with Wave3. In fact, I am writing 
        this using ALL-IN-1 V3.1 BL90 on node DEC:.fno.veli running also 
        OpenVMS T6.1-5Y3.
        
        And my problems with installing ALL-IN-1 onto this system already 
        running Wave3 and OpenVMS T6.1 were almost completely due to my 
        desire to run DEC Notes T2.5 (now V2.5).
        
        But those linking problems have been solved even for ALL-IN-1 
        V3.0A and I am happy owner of single user ALL-IN-1 system.
        
        Most application used to break on DECnet/OSI environment due to 
        their desire to use NCP command language to define objects etc.
        
        Now that Wave3 has very solid NCP emulator built in, most OSI 
        non-aware applications install and work just fine on Wave3 
        environmens IF YOU REMEMBER TO GRANT NET$MANAGE to SYSTEM account 
        prior installation.
        
        
        Major problem used to be the fact that Mailbus did not support 
        DECnet/OSI environment. I believe that is past now though Mailbus 
        people very specifically require at least Wave3, i.e. either 
        DECnet/OSI V5.6 on OpenVMS V5.5-2 or DECnet/OSI V5.7 (still in 
        FT) on OpenVMS V6.0 or later.
        
        
        best regards, Veli
3743.2MAILbus not ALL-IN-1 AIMTEC::WICKS_AAtlanta's Most (In)famous WelshmanFri Jan 07 1994 16:2915
    Don,
    
    As i've said before the support/non-support issue is NOT an ALL-IN-1
    question but a MAILbus question.
    
    The STARS article
    203-ALL-IN-1 IOS V3.0 Not Supported on DECnet/OSI Wave 2 
    explains all and is reproduced in its entire glory in note 1842
    as a search would have shown!
    
    but the question was also brought up in notes 3604, 3430...
    
    Regards,
    
    Andrew.D.Wicks