[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference iosg::all-in-1_v30

Title:	OLD ALL-IN-1 (tm) Support Conference
Notice:	Closed - See Note 4331.l to move to IOSG::ALL-IN-1
Moderator:	IOSG::PYE

Created:	Thu Jan 30 1992
Last Modified:	Tue Jan 23 1996
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4343
Total number of notes:	18308

3462.0. "ALL-IN-1 IOS and MAILworks Installation ?" by TROOA::LFUNG () Wed Oct 27 1993 20:44

    Hi,
    
    I've an ALL-IN-1 IOS customer, who recently did an upgrade to V3.0 on a
    single node. There is Message Router installed but since all the mail
    is going through one node so MR never started and in the upgrade they
    didn't specify to ALL-IN-1 that it's going to use the MR.
    
    Now they have bought TeamLinks mail V1.1 and would like to have
    TeamLinks mail user to exchange mail with ALL-IN-1 IOS users what the
    sequence of step that the customer has to perform to have the
    environment setup properly for the mail exchange ?
    
    Please correct me if I'm wrong, I think the customer has to do the
    following:
    
    1. Configure Message Router and MRGATE
    2. Start Message Router and MRGATE
    3. Re-install, an update installation of  ALL-IN-1 V3.0 (is this 
       necessary ? is there any set up procedure that could be done to 
       eliminate the need of the re-installation ?)
    4. Install DEC MAILworks Server
    5. Install TeamLinks Mail Client on PC
    5. Populate ALL-IN-1 IOS user into DDS
    6. Populate DEC MAILworks user into DDS
    
    
    Thanks,
    Lucia
    
    5.

T.R	Title	User	Personal Name	Date	Lines
3462.1	You don't have to take it all	FORTY2::ASH	Mail Interchange Group, Reading	`Thu Oct 28 1993 09:47`	11
	Hi Lucia, Two things you should be sure of (at least!): You only need MRGATE if you are sending mail to VMSmail users. If all your users are IOS or TeamLinks, then you don't need it. Do you really need or want DDS? It takes a fair bit of managing, and should only be used if you really want a distributed directory. grahame
3462.2	Did they hear about TL V2	IOSG::DUTT	Nigel Dutt	`Thu Oct 28 1993 13:29`	4
	As a matter of interest, has this customer looked at TeamLinks V2? This will allow them to use ALL-IN-1 as the server, and all mail will continue to be local with no need for MR transport within the node. Or did they have a specific reason to add the MAILworks server?