[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference iosg::all-in-1_v30

Title:*OLD* ALL-IN-1 (tm) Support Conference
Notice:Closed - See Note 4331.l to move to IOSG::ALL-IN-1
Moderator:IOSG::PYE
Created:Thu Jan 30 1992
Last Modified:Tue Jan 23 1996
Last Successful Update:Fri Jun 06 1997
Number of topics:4343
Total number of notes:18308

3292.0. "Labels for ALL-IN-1 2.4 kit.Urgent" by ROM01::DESPOSITO () Fri Sep 17 1993 11:58

Sorry,

perhaps it's a silly question, but...

tomorrow I'll go and upgrade to ALL-IN-1 2.4 italian a system that doesn't 
have much disk space (it's unusual, don't you think ;-) ).
I'm trying to create the kit on a TK50 and I really must know:

1) If I put the kit all in one TK50, will the installation fail? (Remember, 
I have to install directly from TK50) 

2) If I must create the four TK50's, will the installation mind also about 
the label names of these TK50? And, in this case, which are the correct 
label names?

Please, answer to me as soon as possible, because I don't have much time to 
create the kit (until this evening!)

                        Thank you in advance for the quick response


                               Licia
T.RTitleUserPersonal
Name		DateLines
3292.1Sorry, correct labels required...IOSG::PYEGraham - ALL-IN-1 Sorcerer's ApprenticeFri Sep 17 1993 12:438
    Yes, you have to get the tape labels right. We check them to make sure
    you have loaded the correct tape.
    
    I'd be surprised if you can get all of the kit on one tape. If you can,
    then if you give the tape the label A10024, then it *should* work. Note
    that this is not a documented or suported way to do things.
    
    Graham
3292.2the 4 labels?ROM01::DESPOSITOFri Sep 17 1993 14:149
OK.

But could you please tell me which are the correct tape labels for all 
the four TK50?So I can install in the supported way.

		Thank you

                        Licia
3292.3PAULUS::HOFMANNStefan Hofmann, LC Frankfurt, ISEFri Sep 17 1993 16:598
    I just read this note, so I hope it's not too late.
    
    If I'm not wrong, there should be a label A10024 for a complete kit on
    one TK. Apart from that, I think there was a A11024 label for a TK
    containing the A component only, and another A12024 and A13024 for the
    B and C component, but I cannot say whether A12024 was for B or C.
    If I find out, I let you know.
    	Stefan
3292.4I RTFM'dAIMTEC::WICKS_AU.S.A 2 England 0 - I was there!Fri Sep 17 1993 17:3614
    
    Well I opened my v2.4 install guide and on page B-3 it says
    
    A12024 is the Market kit 
    A13024 is the Language Kit
    
    A11024 is of course the base kit
    
    ALL-IN-1 v2.4 only took 3 TK50s so I presume the 4th one your talking
    about is Message Router?
    
    regards,
    
    Andrew.D.Wicks
3292.5Tape labelsIOSG::BURTONALL-IN-1 BuilderFri Sep 17 1993 17:4023
    
    	The complete V2.4 kit should easily fit on a TK50.  The US English
    kit totals ~30MB.  As stated before the label should be A10024.
    
    	For reference, when multiple tapes are used the labels should be :
    
    		Base component A1024.%		Label A11024
    		Mkt  component A1C*024.%        Label A12024
    		Lang component A1L*024.%	Label A13024
    
    	For ALL-IN-1 V3.0 the labels should be :
    
    		Base component A1030.%		Label A11030
    		Lang & mkt component  A1L*030.%	Label A12030
    				      A1C*030.%
    
    		Addit'l mkt components A1C*030.% Label A12030
    
    Regards,
    
    Martin.
3292.6ThankdROM01::DESPOSITOTue Sep 21 1993 10:249
Thank you to all.

At last I found enough disk space to install from disk.
But this information will still be useful next time

		Cheers 

                   Licia