| Title: | *OLD* ALL-IN-1 (tm) Support Conference |
| Notice: | Closed - See Note 4331.l to move to IOSG::ALL-IN-1 |
| Moderator: | IOSG::PYE |
| Created: | Thu Jan 30 1992 |
| Last Modified: | Tue Jan 23 1996 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4343 |
| Total number of notes: | 18308 |
Customer is running 3.0 ALL-IN-1 and LOTUS 1-2-3 1.5. He cannot
get GOLD I to work within LOTUS, but it works OK from any menu etc.
I can do GOLD I OK and this brings up my interrupt menu. Comparing
a trace shows that mine calls OA$DO:APPL_INT.SCP but his doesn't.
I have checked my profile, my Lotus setup with him all of which
appear to be the same. The only difference I can determine is that
his Lotus image
DISK$APPLICATIONS:[ALLIN1.L123_A1.LIB_SHARE]L123_A1$MAIN.EXE;1
is dated November 1992 along with his savesets and ours are dated
13-JAN-1993.
I know there were problems with the earlier kit in the UK - could
this be one of the problems? Or is there anything else to check for
why his Gold I doesn't work? I've tried this on VT220's, VT320's
etc, so it isn't the terminal or keyboard he is using.
Thanks for any help
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 3000.6 | Sounds like the wrong .EXE | IOSG::SHOVE | Dave Shove -- REO2-G/M6 | Wed Jul 21 1993 13:16 | 13 |
Not knowing anything specifically about the L123 integration, but . . .
Gold-I in integrated applications has to work by issuing a DO APPL_INT
to ALL-IN-1 via the mailbox. Part of the "integration" is to modify the
application code to recognise Gold-I and do this (also Gold-* etc).
So, if the customer's version of L123 isn't issuing the DO APPL_INT
command, it's wrong in some way. Are you sure that it's a version which
is intended to work under ALL-IN-1?
Dave.
(PS - isn't there a conference somewhere for L123? Anyone?)
| |||||
| 3000.7 | Since Dave asked | AIMTEC::WICKS_A | U.S.A 2 England 0 - I was there! | Wed Jul 21 1993 13:35 | 1 |
MRKTNG::LOTUS | |||||
| 3000.8 | KERNEL::SMITHERSJ | Living on the culinary edge.... | Thu Jul 22 1993 10:43 | 10 | |
Yeah, thanks, but if it's OK within LOTUS for VMS but fails within
ALL-IN-1 integration, I normally would try here first.
The answer was that any user with a RESTRICTED flag in AUTHORIZE
cannot use GOLD I, GOLD G, GOLD W and GOLD #. Remove the flag and
the key functions can then be used without a problem.
Thanks for your help
julia
| |||||