[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference iosg::all-in-1_v30

Title:*OLD* ALL-IN-1 (tm) Support Conference
Notice:Closed - See Note 4331.l to move to IOSG::ALL-IN-1
Moderator:IOSG::PYE
Created:Thu Jan 30 1992
Last Modified:Tue Jan 23 1996
Last Successful Update:Fri Jun 06 1997
Number of topics:4343
Total number of notes:18308

2805.0. "Document Classification Help" by DYPSS1::SMITH (TBDBITL Alumnus) Fri Jun 04 1993 20:56

    I am trying to implement document classification procedures at my
    customer's site.  I have had some minimal success but have run into a
    few brick walls.
    
    I feel I may be re-inventing the wheel here.  Is there anyone who has
    implemented a system like this (internal or external) who may be
    willing to give insight into some of the problems I am facing?
    
    Specifically, some of the problems are:
    
    	1) Finding a CAB$ field to use that would transfer with a mail
    message locally or to a remote system.
    
    	2) Finding attributes that could be used with attachments as well.
    
    	3) Can't find a way to change the WPS-Plus editor status lines.
    
    Also, I have seen SYSUSER mentioned.  What is that?
    
    Thanks,
    Brad
T.RTitleUserPersonal
Name		DateLines
2805.1More question than answers :-)!!TINNIE::SETHIAhhhh (-: an upside down smile from OZMon Jun 07 1993 01:2825
    Hi Brad,
    
    >1) Finding a CAB$ field to use that would transfer with a mail
    >   message locally or to a remote system.
    
    I have done this in the past and it's been discussed in the previous
    conference.  The Subject field can be manipulated, when a document is
    sent it's the title field that's used as the subject field.
    
    Can you tell us what you are trying to achive so we get a better idea,
    than we could perhaps address the issue.  I hate to guess I may lead
    you up the garden path so to speak.
    
    >2) Finding attributes that could be used with attachments as well.
    
    Please give us some more information.
    
    >3) Can't find a way to change the WPS-Plus editor status lines.
    
    I think from what I can remember this is hard coded, I may well be
    wrong, I vagually remember trying to make changes sometime back.
    
    Regards,
    
    Sunil
2805.2More informationDYPSS1::SMITHTBDBITL AlumnusMon Jun 07 1993 14:2022
    >    I have done this in the past and it's been discussed in the previous
    > conference.  The Subject field can be manipulated, when a document is
    > sent it's the title field that's used as the subject field.
    
    Where could I find more details about how this is done?  The internal
    ALL-IN-1 environment seems to be set up that way.  Are these
    customizations something that I could get my hands on?
    
    > Can you tell us what you are trying to achive so we get a better idea,
    > than we could perhaps address the issue.  I hate to guess I may lead
    > you up the garden path so to speak.
    
    Ok.  This customer wants every document or e-mail message to be
    unclassified, confidential, or secret.  They want this classification
    to be displayed at the top and bottom of each page whenever the
    document is being edited, displayed, or printed.  Also, when this
    document or message is forwarded or otherwise attached to a mail
    message, the classification should be retained.
    
    
    Thanks,
    Brad
2805.3The toolkit I thinkAIMTEC::WICKS_AU.S.A 2 England 0 - I was there!Tue Jun 15 1993 20:4713
    Brad,
    
    Internal systems use the near legendary and almost certainly
    perfect USIS toolkit comprising from what I remember two bits called
    SYSUSER and SYSTIDY - one of them is now an ASSET. I can't
    remember which bit the classification stuff is in but there's a
    notesfile out there somewhere which I hope Ron Sherman can remind 
    me what it's called.
    
    Regards,
    
    Andrew.D.Wicks
2805.4SYSUSER Notes fileSAHQ::WOLFEJohn Wolfe - (404)-924-6463Tue Jun 15 1993 22:2613
    
	Re - .1

	Thanks for the kind words Andrew.

	Just for the record, the USIS toolkit is no more.  It has been 
replaced by SYSTIDY and SYSUSER.  The notes file Andrew mentioned is 
ATLANA::A1-TOOLKIT which is where we try to answer questions, etc. regarding
these kits.  The classification bit is in SYSUSER.

HTH

John