[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference iosg::all-in-1_v30

Title:*OLD* ALL-IN-1 (tm) Support Conference
Notice:Closed - See Note 4331.l to move to IOSG::ALL-IN-1
Moderator:IOSG::PYE
Created:Thu Jan 30 1992
Last Modified:Tue Jan 23 1996
Last Successful Update:Fri Jun 06 1997
Number of topics:4343
Total number of notes:18308

2717.0. "DUMP when I call WPDXMENU form..." by VAXRIO::WILLECKE (I'm still trying...) Sat May 15 1993 22:49

    I found two other problems today!!!!
    
    I had deinstaled SFCP, Intalled the ALL-IN-1 V3.0-1 PATCH and TeamRoute
    for ALL-IN-1 V1.1... After that, I customized the WPDXMENU element to
    include the option VTP (for VTXprep). The customization was OK, but
    now, when I call the DT option, it shows me a DUMP and quits
    ALL-IN-1!!!! Even when I try to Remove this element from the live area,
    it shows the DUMP and quits ALL-IN-1! The customization is OK, because
    I had done this last week and it was working, but I had run the CART
    from the PATCH and it told me to remove the WPDXMENU element, so I had to
    customize it again...
    
    How can I fix this? What is wrong?
    
    Thanks,
    Valeria.
T.RTitleUserPersonal
Name		DateLines
2717.1let's see what we have, firstMIMS::BUTLER_TMon May 17 1993 15:2917
    Hello:
    
    Check the form you are using (ctl/n, oa$form_****, or oa$form_info)
    and see what you have.
    
    Also, check the DT option named data to make sure there are no changes.
    
    And, before entering the form do the following (you may want to turn
    on trace, also);
    
    	< oa$msg_trap.
    
    This will give you the information you need to get started.
    
    
    Tim
2717.2Strange, very Strange...VAXRIO::WILLECKEI&#039;m still trying...Mon May 17 1993 21:2217
    Tim,
    
    I turned on the trace and I received the message "SYSTEM-F-ACCVIO,
    access violation, reason mask=01, virtual address=01AC992F, PC=0019D625, 
    PSL=03C00000" . But, I noticed a strange thing, when I access the
    WPDXMENU from the CM and test it, it seams to be OK, after the test I
    can access the DT option from everywhere without any problem!!!!!
    
    What does this means????
    
    The DT named data is OK, the only change is that I included the VTP
    option for the VTXprep. The DT option is beeing called from the default
    form and is right (FORM WPDXMENU).
    
    Val.
2717.3It is working now!VAXRIO::WILLECKEI&#039;m still trying...Mon May 17 1993 21:4310
    TIM,
    
    I Moved the element WPDXMENU again to the Live Area and it is working
    now!!!! I don't understand what happened, but I think that it had
    something to be with a different version from the element in the Live
    area and the other in the development...
    
    Anyway, thank you very much.
    
    Valeria.