| Title: | *OLD* ALL-IN-1 (tm) Support Conference |
| Notice: | Closed - See Note 4331.l to move to IOSG::ALL-IN-1 |
| Moderator: | IOSG::PYE |
| Created: | Thu Jan 30 1992 |
| Last Modified: | Tue Jan 23 1996 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4343 |
| Total number of notes: | 18308 |
We just upgraded my customer system from 2.4 to 3.0 the past two days. I had been developing the customizations on a co-existant V3 system. For some reason the print attribute files in [ALLIN1.PRINT] on the production side didn't appear to get updated, compared to all the newer files in the co-ex system. For now I just copied all the newer PRA/PRC files into the production area as a higher version, but on some print types, like using TERMINAL, I'm getting the following error: Error occurred during operation : PRINT_ATTRIBUTE_FILE_ERROR No further detail is given. ??? How/what do I track down to fix all this? I have narrowed it down to some interaction with the customized printing here - when I tried it with /NOCUST a TERMINAL print worked just fine. Still, any hints would be appreciated. -Al
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2430.1 | But I haven't tried this! | AIMTEC::WICKS_A | Oscar the Grouch is an Optimist! | Thu Mar 18 1993 00:37 | 29 |
Al,
You know I wouldn't normally go anywhere near a printer table but as
it's you I did a search in STARS and came up with an article entitled
Printer Tables And Upgrade Installation To V3.0 which might help.
There's lots of words in it that I don't understand but here are two
apparently relevant extracts (:==:)
Regards,
Andrew.D.Wicks
When a V2.3 or V2.4 ALL-IN-1 system is upgraded to V3.0, all
printer tables which are supplied as standard with ALL-IN-1
will be provided in the Digital area (KOA$PRINT_SHARE which
was KOA$PRINT). This will replace/override any customizations that
you may have made to these tables in previous versions of ALL-IN-1.
The printer tables provided (and required) with ALL-IN-1 V3.0 are
in a WPS-PLUS V4 format.
Any non-standard printer tables which you created in previous
versions of ALL-IN-1 (possibly to support non-Digital printers)
will not be affected by the upgrade installation of ALL-IN-1. If
they are not in the required format, you will have to convert
them using the new WP/CM PT CO option before they can be used in
ALL-IN-1 Version 3.0.
| |||||
| 2430.2 | For Print to TERMINAL differences | IOSG::NEWLAND | Richard Newland, IOSG, REO2-G/L2 | Thu Mar 18 1993 11:05 | 9 |
If Print to TERMINAL works differently when running /CUST and /NOCUST check which WPS-PLUS Printer Tables are being used. You will probably find that the WPS-PLUS Printer Tables being used with /CUST has not be converted to the WPS-PLUS V4 format, or if it has been converted it needs further changes to make it work with the WPS-PLUS V4 formatter. Richard | |||||