Conference iosg::all-in-1_v30

1220.0. "Installing ALL-IN-1 V3.0 loops while linking! Whyr?" by EVOIS8::DEC_HELLAS () Tue Aug 11 1992 14:24

Hi there,

I am trying to install ALL-IN-1 V3.0 in a VAXstation 3100 (24 Mb, and more 
than sufficient disk space. Everything goes OK, until  it arrives to the 
point where it starts to link the OA$MAIN image. There it hangs for ever. I 
monitor the process and it seems that it is in an infinite loop! It stays 
there forever... Any clues?  

rgrds

Nicholas

    PS: I have read note 1170.* on this confrence but in my case it did not
    work... Below is the installation log...   
    
===========================================================================
    This is a FULL ALL-IN-1 V3.0 installation.
%A1-I-DTRNOLINK, DATATRIEVE will not be linked with ALL-IN-1
%A1-I-WPSLINK, The WPS-PLUS editor will be installed and linked with ALL-IN-1
%A1-I-ACMSNOLINK, ACMS will not be linked with ALL-IN-1
%A1-I-NOMLLINK, ALL-IN-1 will be linked as a single language system
* Do you want ALL-IN-1 to be configured to use Message Router [YES]? 
* Do you want to use a remote Message Router [NO]? YES
* What node is the Message Router on: ATHINA
%A1-I-GPC, Checking Group Conferencing support software prerequisites
    NOTES$SHARE image is not installed.  You may continue this installation
    but you will not be able to use Group Conferencing until you
    have installed NOTES V2.1 and relinked ALL-IN-1

* Do you want to continue (without Group Conferencing support) [YES]? 
   This is the ENGLISH version of ALL-IN-1 V3.0
%A1CUS-I-BASEREV, ALL-IN-1 BASE kit			- Revision PBL122D
%A1CUS-I-CTRYREV, ALL-IN-1 US MARKET kit		- Revision PBL122D
%A1CUS-I-LANGREV, ALL-IN-1 ENGLISH LANGUAGE kit		- Revision PBL122D

Building shared image modules
Shared image modules built
Linking the OA$MAIN image
ATHELA::_RTA1: 13:28:45 LINK      CPU=01:16:20.54 PF=78080 IO=196414 MEM=1255
ATHELA::_RTA1: 16:07:41 LINK      CPU=03:34:39.51 PF=78081 IO=290923 MEM=1255

    Also as one of the replies to note 1170 says retry with OPTIONS D

    Hi Andrew,
    
    The options D did not work we did not get any information.
    
    I my entry to conclude the topic I was left wondering if the 2.4 files
    in SYS$SHARE had caused the problem.  The pre-installation requirements
    were met.
    
    The ALL-IN-1 installation in this case is it being carried out on a
    cluster/system that did not have ALL-IN-1 previously installed ?  Was
    the system disk in fact a copy of an ALL-IN-1 cluster/system ?  Are
    there such files as SYS$SHARE:DPESHR.EXE present ?  It would be great
    if this could be confirmed because I suspect that this may be the cause
    of the problem.  As I have said I am willing to learn and if my theory
    is proved wrong I stand to be corrected.
    
    Sunil

    
    I upgraded my VS 3100 from VMS V5.4-2 to V5.5-1 and reinstalled
    ALL-IN-1 V3.0. This time everything went fine (of course no library
    routines missing this time!).
    
    Suggestion:  I beileve that part of the ALL-IN-1 pre-installation
    checks, should be a check for the existense of system library
    routines and images required during the linking phase. That would save 
    us a lot of time during installation, instead of waiting to arrive at the
    linking phase to find it out!
    
    
    PS: The moderator of the conference may now remove this topic, if he
    wishes so.

    
    The kit that I have is the correct kit:
    
    ALL-IN-1 IOS Server for VMS V3.0 PBL123A  (US) ENGLISH 21-MAR-1992
    
    However, I am still waiting for an answer: 
    
    Anyone can tell why I get stuck, when from the ALL-N-1 Manager account,
    I do: MGT MFC MD IAD?
    
    The process hungs there....
    
    
    Nicholas