| Title: | *OLD* ALL-IN-1 (tm) Support Conference |
| Notice: | Closed - See Note 4331.l to move to IOSG::ALL-IN-1 |
| Moderator: | IOSG::PYE |
| Created: | Thu Jan 30 1992 |
| Last Modified: | Tue Jan 23 1996 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4343 |
| Total number of notes: | 18308 |
Customer has the following situation:
ALL-IN-1 V2.2
LA75 printer
A person receives a document that is 61 lines per page which messes up
the alignment because it is not printing at 66 lines per page.
Is there some AUTOMATIC way convert the document to 66 lines/page
Thanks
Jim Z
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 947.1 | A shot in the dark | WAYLND::HOWARD | Our business is computers not money | Tue Jun 30 1992 21:43 | 7 |
How is the LA75 attached? It sounds like the terminal port needs to be
set to /FEED. With the terminal set to /NOFEED, VMS tries to convert
the formfeed into line feeds, which causes the problem. With the
terminal set to /FEED, then the document will print properly because
the formfeed will get through to the printer.
Ben
| |||||
| 947.2 | Not quite a bulls eye | POBOX::ZEISLER | Jim Zeisler DTN 474-5574 | Wed Jul 15 1992 21:22 | 10 |
I pass your note on to customer and found that that didn't work either.
I assume you ment /FORM.
Customer can do a GOLD A and change length to 66 and all is fine. Is
the print form length stored some where??
Thanks
Jim Z
| |||||