[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference iosg::all-in-1_v30

Title:*OLD* ALL-IN-1 (tm) Support Conference
Notice:Closed - See Note 4331.l to move to IOSG::ALL-IN-1
Moderator:IOSG::PYE
Created:Thu Jan 30 1992
Last Modified:Tue Jan 23 1996
Last Successful Update:Fri Jun 06 1997
Number of topics:4343
Total number of notes:18308

878.0. "Error: continuation record not found... in TRM" by LASCPM::BARNETTE (Guerrilla in the midst) Wed Jun 17 1992 02:33

    
    	Whilst examining the log file following a run of the TRM
    	housekeeping procedure, I encountered the following error:
    
    	Error: continuation record not found when cont_flag set:
    	First record-key = 	OA$SHARE92:ZSYUJV62O.WPL
    	Continuation record-key =OA$SHARE92:ZSZKH8H2Y.WPL
    
    	(There were many other errors of this type.)
    
    	The log file goes on to indicate that phase 3 of the procedure
    	cannot be run due to errors in phase 1/2. 
    	
    	What is the proper action to take to resolve such errors?
    
    
    	Neal B.
T.RTitleUserPersonal
Name		DateLines
878.1IOSG::MAURICEA week is a long time in office politicsWed Jun 17 1992 09:5914
    These errors will not stop TRM going into Phase 3. If you're running
    the latest version then the log file will indicate which errors prevent
    TRM going into Phase 3. On the assumption that you're running an older
    version look into the log file and check for "user logged in" errors,
    or failures to open DOCDB files. If you can't see them then post the
    log file.
    
    What version of ALL-IN-1 are you running and to what patch level? On
    the later versions of TRM the continuation record problems will be
    repaired by TRM, but not on older versions.
    
    Cheers
    
    Stuart
878.2Oh, yeah...SWAM2::BARNETTE_NEWed Jun 17 1992 16:369
    
    	There was one user who had a blank directory field, now that 
    	I think about it. I'll fix that and try running it again
    	when I get a chance. BTW, ALL-IN-1 V2.4, patch K603 under
    	VMS V5.4-3.
    
    	Thanks!
    
    Neal Barnette
878.3Request for more informationGIDDAY::SETHIMan from DownunderTue Jul 07 1992 08:4314
    G'day,
    
    I have a customer who has K601 and K602 installed on his system and is
    getting the problem stated in note .0.
    
    If the customer installs K603 and then K605 would that solve his
    problem ?   He has been told that it takes up to 12 hours to install
    and does not solve the problem.  I just want a confirmation that the
    problem is solved.  If it's the case that the problem is not solved is
    it solved under Version 3.0 ?
    
    Thanks 
    
    Sunil
878.4K603IOSG::MAURICECeci n'est pas une noteTue Jul 07 1992 09:218
    Hi Sunil,
    
    You need K603 to get the fix that will cause incorrect continuation
    flags to be repaired. The fix is also, of course, in V3.0.
    
    Cheers
    
    Stuart
878.512 hours is 12 times too longAIMTEC::WICKS_ADEC Mail Works for ME sometimesTue Jul 07 1992 18:0410
    Sunil,
    
    And K603 doesn't take anyway near 12 hours to install - 1 hour more
    likely. K605 doesn't buy you anything if you don't have the WPS-PLUS v4
    option installed but you might like to spend an additional 20-30
    minutes putting K604 on.
    
    Regards,
    
    Andrew.D.Wicks