T.R | Title | User | Personal Name | Date | Lines |
---|
2742.1 | | STAR::MCLEMAN | Jeff McLeman, VMS development | Thu May 10 1990 08:24 | 34 |
| If you tried to use the VR160/VR290/VR299 on the SPX, and it switches
were set wrong, you'd get whjat you saw.
The following is the switch settings on the SPX module for the proper monitor:
For the VR160,VR290 and VR299 and VR297 monitors:
switches should be in the OFF postition.
For the VRT19 monitor:
Switches should be in the ON postition.
|-------------------|
| |
| |-------------| |
| | | || |
| |-------------| |
ON | | OFF
| |-------------| |
| | | || |
| |-------------| |
| |
|-------------------|
(note that switch pack would be on your left lower side, with the
non-component side facing you.)
hope this helps.
jeff
|
2742.2 | | STAR::MCLEMAN | Jeff McLeman, VMS development | Thu May 10 1990 08:25 | 3 |
| Also,
you can order EK-WS01X-OS-001 to get the owners manual for the SPX.
|
2742.3 | Thanks for the info | MAZE::FUSCI | DEC has it (on backorder) NOW! | Thu May 10 1990 18:52 | 8 |
| re: .1, .2
Strangely enough, all three came from IEG with with the switches set to
(off,on).
(My order for the manual is already placed.)
Ray
|
2742.4 | | STAR::MCLEMAN | Jeff McLeman, VMS development | Thu May 10 1990 21:35 | 3 |
| well actually one of the switches is unused (the bottom one in my
previous example), but it is easy to explain flipping both.
|