| Title: | DECWINDOWS 26-JAN-89 to 29-NOV-90 |
| Notice: | See 1639.0 for VMS V5.3 kit; 2043.0 for 5.4 IFT kit |
| Moderator: | STAR::VATNE |
| Created: | Mon Oct 30 1989 |
| Last Modified: | Mon Dec 31 1990 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 3726 |
| Total number of notes: | 19516 |
Hi everybody,
a customer reclaims a bad problem with PrintScreen.
After issuing 'Print Entire Screen' from the SessMgr the printout
works fine - but only the half!
It seems that the printout 'forgets' the upper half of the picture
- with no error message.
Are there perhaps any Sysgen-Parameters responsible for this
behavior?
The customer has 8MB VS200. The same behavior with my 14MB VS2000.
Any help'd be appreciated.
Armin Erlemann, Service Center Frankfurt
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1826.1 | CDA Viewer Blues? | GOLLY::MILLER | I need 'Deeper Understanding' | Tue Dec 05 1989 21:02 | 10 |
<<< Note 1826.0 by FRSTSC::ERLEMANN >>>
-< PrintScreen prints only the half! >-
Are you sure it isn't just the (brain-dead) scroll bars on the Viewer?
Try expanding the window and/or pull the image into Paint or DECwrite
and I'll bet you'll see the whole thing.
Regards,
== ken miller ==
| |||||
| 1826.2 | No! | FRSTSC::ERLEMANN | Fri Dec 08 1989 05:57 | 7 | |
No!
It has nothing to do with the Viewer and it is not a specific
layered product problem as with Paint or DECwrite.
It's just a simple 'PrintScreen' from the Session Manager.
Armin
| |||||