T.R | Title | User | Personal Name | Date | Lines |
---|
44.1 | | RDGENG::LESLIE | Andy ��� Leslie, a man of vision :-) | Fri Jan 27 1989 10:17 | 4 |
| Edwin
the version in CLT::NOTES$KIT: has been okay for some time now.
Andy
|
44.2 | | 8312::CURTIS | Steve Curtis - Colorado Springs | Mon Jan 30 1989 15:30 | 6 |
| Sorry to disagree. I just copied the saveset from CLT::NOTES$KIT, and
tried to install it. It doesn't want to work on SDC 5.1. It says -
Wrong interface/section file - section file must be rebuilt
|
44.3 | No problem here with notes... | RWCVAX::COULSON | Roger Coulson DTN 223-6158 | Mon Jan 30 1989 15:41 | 11 |
| re:.2
I am running the notes kit from CLT::notes$kit:. I can run it both in
character cell mode and in DECwindows mode. The file is called
notes020.a and is dated 15-Jan-1989 11:20. You must also have the
license loaded. Are you running VMS V5.1 and DECwindows V5.1 as sent
to SDC or are you running a field test version?
/s/ Roger
|
44.4 | Section file incompatible with latest TPU | IAGO::SCHOELLER | Who's on first? | Mon Jan 30 1989 16:25 | 11 |
| The error in .2 is with the character cell interface. If this is you first
time using V2.0-FT of notes, then you have to rebuild your section file. This
is independent of whether you are using the version compatible with DECwindows
SDC or DECwindows FT2.1.
If you do not have a personal NOTE$SECTION you might want to check whether
there is a copy SYS$SPECIFIC:[SYSLIB]. This would override the newly
installed copy in SYS$COMMON:[SYSLIB].
Dick
|
44.5 | | 8312::CURTIS | Steve Curtis - Colorado Springs | Tue Jan 31 1989 09:55 | 6 |
| Yep, it was the NOTES$SECTION in SYS$SPECIFIC:[SYSLIB]. It works fine,
now.
Thanks,
Steve
|