| I just tried this on my proto running V4.8-6. Unfortunately, I don't
have a CIPCA right now.. But I did try an MSCP device (KFPSA) and it
worked okay for me. Log attached. Please send me the log from the
customer. Thanks, BC
P00>>>sho dev
polling ncr0 (NCR 53C810) slot 1, bus 0 PCI, hose 1 SCSI Bus ID 0
dka500.5.0.1.1 DKa500 RRD45 1645
polling dac0 (Mylex DAC960) slot 2, bus 0 PCI, hose 1
dra0.0.0.2.1 DRA0 1 Member JBOD
dra1.0.0.2.1 DRA1 1 Member JBOD Failed
polling isp0 (ISP1020) slot 3, bus 0 PCI, hose 1 SCSI Bus ID 7
mkb0.0.0.3.1 MKb0 TLZ06 0389
dkb100.1.0.3.1 DKb100 RZ26 392A
dkb200.2.0.3.1 DKb200 RZ29B 0007
dkb300.3.0.3.1 DKb300 RZ29B 0014
polling floppy0 (FLOPPY) PCEB - XBUS hose 0
dva0.0.0.1000.0 DVA0 RX23
polling kfpsa0 (DEC KFPSA) slot 5, bus 0 PCI, hose 0
pua.7.0.5.0 dua Bus ID 7
dua30.0.0.5.0 $1$DIA30 (RF0300) RF35
dua33.1.0.5.0 $1$DIA33 (RF0206) RF35
dua32.2.0.5.0 $1$DIA32 (R5CCNC) RF35
dua31.3.0.5.0 $1$DIA31 (RF0204) RF35
P00>>>
P00>>>set bootdef_dev dua40,dka400,dka600,dua30
P00>>>sho bootdef_dev
bootdef_dev dua40.0.0.5.0 dka400.4.0.1.1 dka600.6.0.1.1 dua30.0.0.5.0
P00>>>
P00>>>b -fl 0,0
(boot dua40.0.0.5.0 -flags 0,0)
device dua40.0.0.5.0 not found
device dua40.0.0.5.0 not found
device dua40.0.0.5.0 not found
device dua40.0.0.5.0 not found
failed to open dua40.0.0.5.0
(boot dka400.4.0.1.1 -flags 0,0)
FRU table creation disabled
failed to read dka400.4.0.1.1
bootstrap failure
(boot dka600.6.0.1.1 -flags 0,0)
FRU table creation disabled
failed to read dka600.6.0.1.1
bootstrap failure
(boot dua30.0.0.5.0 -flags 0,0)
FRU table creation disabled
block 0 of dua30.0.0.5.0 is a valid boot block
reading 1001 blocks from dua30.0.0.5.0
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 7d200
initializing HWRPB at 2000
initializing page table at 1f2000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
OpenVMS (TM) Alpha Operating System, Version H6.2-1H3
%SMP-I-SECMSG, CPU #01 message: P01>>>START
%SMP-I-SECMSG, CPU #02 message: P02>>>START
%SMP-I-CPUBOOTED, CPU #01 has joined the PRIMARY CPU in multiprocessor operation
%SMP-I-SECMSG, CPU #03 message: P03>>>START
%SMP-I-CPUBOOTED, CPU #02 has joined the PRIMARY CPU in multiprocessor operation
%SMP-I-CPUBOOTED, CPU #03 has joined the PRIMARY CPU in multiprocessor operation
$! Copyright (c) 1995 Digital Equipment Corporation. All rights reserved.
%STDRV-I-STARTUP, OpenVMS startup begun at 4-JAN-1996 22:51:12.62
%PKQDRIVER-W- PKB0, WARNING! nvram speed doesn't match board clock speed.
%PKQDRIVER-W- PKB0, nvram set to 60 MHZ. Board set to 40MHZ
%DRA, firmware version V2.19
%DRA, drives = 2, optimal = 1, degraded = 0, failed = 1
%DRA, SCSI drive at channel 0, target 2 dead
%DRA, drive 0, 8378368 LBNs, optimal, 1 Member JBOD
%DRA, drive 1, 8378368 LBNs, failed, 1 Member JBOD
%DRA1, disk error while reading forced-error metadata
%RUN-S-PROC_ID, identification of created process is 00000085
%SET-I-NEWAUDSRV, identification of new audit server process is 00000089
%%%%%%%%%%% OPCOM 4-JAN-1996 22:52:10.86 %%%%%%%%%%%
Operator _WHIP01$OPA0: has been enabled, username SYSTEM
%%%%%%%%%%% OPCOM 4-JAN-1996 22:52:10.91 %%%%%%%%%%%
Operator status for operator _WHIP01$OPA0:
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY,
LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10,
OPER11, OPER12
%%%%%%%%%%% OPCOM 4-JAN-1996 22:52:11.68 %%%%%%%%%%%
Logfile has been initialized by operator _WHIP01$OPA0:
Logfile is WHIP01::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;135
%%%%%%%%%%% OPCOM 4-JAN-1996 22:52:11.68 %%%%%%%%%%%
Operator status for operator WHIP01::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;135
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY,
LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10,
OPER11, OPER12
%%%%%%%%%%% OPCOM 4-JAN-1996 22:52:11.85 %%%%%%%%%%%
Message from user JOB_CONTROL on WHIP01
%JBC-E-OPENERR, error opening SYS$COMMON:[SYSEXE]QMAN$MASTER.DAT;
%%%%%%%%%%% OPCOM 4-JAN-1996 22:52:11.90 %%%%%%%%%%%
Message from user JOB_CONTROL on WHIP01
-RMS-E-FNF, file not found
%%%%%%%%%%% OPCOM 4-JAN-1996 22:52:16.71 %%%%%%%%%%%
Message from user SYSTEM on WHIP01
%SECSRV-E-NOPROXYDB, cannot find proxy database file NET$PROXY.DAT
%RMS-E-FNF, file not found
%DECdtm-W-NAMENEQ, DECnet nodename (WHIP11) is not equal to SCSNODE (WHIP01)
%%%%%%%%%%% OPCOM 4-JAN-1996 22:52:16.75 %%%%%%%%%%%
Message from user SYSTEM on WHIP01
%SECSRV-E-NOPROXYDB, cannot find proxy database file NET$PROXY.DAT
%RMS-E-FNF, file not found
%DECdtm-W-ADDRNEQ, DECnet address (61510) is not equal to SCSSYSTEMID (61500)
%%%%%%%%%%% OPCOM 4-JAN-1996 22:52:16.76 %%%%%%%%%%%
Message from user SYSTEM on WHIP01
%SECSRV-I-SERVERSTARTINGU, security server starting up
%DECdtm-F-NOSTART, DECdtm facility not started
%%%%%%%%%%% OPCOM 4-JAN-1996 22:52:16.85 %%%%%%%%%%%
Message from user SYSTEM on WHIP01
%SECSRV-I-CIASTARTINGUP, breakin detection and evasion processing now starting u
p
The OpenVMS system is now executing the site-specific startup commands.
%%%%%%%%%%% OPCOM 4-JAN-1996 22:52:18.45 %%%%%%%%%%%
Message from user AUDIT$SERVER on WHIP01
Security alarm (SECURITY) and security audit (SECURITY) on WHIP01, system id: 61
500
Auditable event: Audit server starting up
Event time: 4-JAN-1996 22:52:18.17
PID: 00000083
Username: SYSTEM
%SET-I-INTSET, login interactive limit = 64, current interactive value = 0
SYSTEM job terminated at 4-JAN-1996 22:52:19.06
Accounting information:
Buffered I/O count: 1916 Peak working set size: 3440
Direct I/O count: 860 Peak page file size: 20368
Page faults: 1144 Mounted volumes: 0
Charged CPU time: 0 00:00:02.75 Elapsed time: 0 00:01:07.44
Welcome to OpenVMS Alpha (TM) Operating System, Version H6.2-1H3
Username:
Username: SYSTEM
Password:
Welcome to OpenVMS AXP (TM) Operating System, Version H6.2-1H3
Last interactive login on Sunday, 1-JAN-1995 00:45:27.11
$
|
| One of our qual sites just verified that V4.8-7 console fails over
during booting with a CIPCA + HSJ50s config.. V4.8-7 is one or two
unrelated changes removed from V4.8-6, so V4.8-6 should behave the
same way.
From: STEVMS::BOWSE "like a hound on a hambone" 4-JUN-1997 09:38:12.67
To: MAY30::CUMMINS
CC:
Subj: RE: Alphaserver_4100 note #647
Bill,
Steve has tried this on our Complex Systems Test environment cluster
using Rawhide (Jafrey) w/cipca to HSJ50s. It works here - see
attached.
- Walt
From: STEVMS::ESONIS "What now?" 4-JUN-1997 08:50:45.44
To: STEVMS::BOWSE
CC: ME
Subj: RE: Have you seen this or tried this?
The boot device list works for me...
Jafrey boots from DUA703 on HSJ01(node 19) and HSJ03(node 27).
DUA703 is a 4 member stripe set.
in the following console output, the disk is being served
by HSJ03 (27)... the boot list calls for hsj01(19) first, then
fails over to the second controller, hsj03(27)...
JAFREY boot_dev dub703.19.0.2.0 dub703.27.0.2.0
JAFREY boot_file
JAFREY boot_osflags 1,0
JAFREY boot_reset OFF
JAFREY bootdef_dev dub703.19.0.2.0 dub703.27.0.2.0
JAFREY booted_dev dub703.27.0.2.0
JAFREY booted_file
JAFREY booted_osflags 1,0
JAFREY P00>>>B
JAFREY (boot dub703.19.0.2.0 -flags 1,0)
JAFREY device dub703.19.0.2.0 not found
JAFREY device dub703.19.0.2.0 not found
JAFREY device dub703.19.0.2.0 not found
JAFREY device dub703.19.0.2.0 not found
JAFREY failed to open dub703.19.0.2.0
JAFREY (boot dub703.27.0.2.0 -flags 1,0)
JAFREY block 0 of dub703.27.0.2.0 is a valid boot block
JAFREY reading 904 blocks from dub703.27.0.2.0
JAFREY bootstrap code read in
JAFREY base = 200000, image_start = 0, image_bytes = 71000
JAFREY initializing HWRPB at 2000
JAFREY initializing page table at 1f2000
JAFREY initializing machine state
JAFREY setting affinity to the primary CPU
JAFREY configuring I/O adapters...
JAFREY ncr0, hose 1, bus 0, slot 1
JAFREY kfpsa0, hose 1, bus 0, slot 2
JAFREY ncr1, hose 1, bus 0, slot 3
JAFREY tulip0, hose 1, bus 0, slot 4
JAFREY dac0, hose 1, bus 0, slot 5
JAFREY floppy0, hose 0, bus 1, slot 0
JAFREY cipca0, hose 0, bus 0, slot 2
JAFREY jumping to bootstrap code
JAFREY
JAFREY halted CPU 0
JAFREY
JAFREY halt code = 1
JAFREY operator initiated halt
JAFREY PC = 1005dba8
JAFREY P00>>>set n mode adv
JAFREY Console is in advanced mode
JAFREY P00>>>sho *
JAFREY auto_action HALT
JAFREY boot_dev dub703.19.0.2.0 dub703.27.0.2.0
JAFREY boot_file
JAFREY boot_osflags 1,0
JAFREY boot_reset OFF
JAFREY bootdef_dev dub703.19.0.2.0 dub703.27.0.2.0
JAFREY booted_dev dub703.27.0.2.0
JAFREY booted_file
JAFREY booted_osflags 1,0
JAFREY cda0 dka100.1.0.1.1
JAFREY char_set 0
JAFREY com1_baud 9600
JAFREY com1_flow SOFTWARE
JAFREY com1_modem OFF
JAFREY com2_baud 9600
JAFREY com2_flow SOFTWARE
JAFREY com2_modem OFF
JAFREY console serial
JAFREY cpu_enabled ff
JAFREY d_group field
JAFREY d_omit
JAFREY d_passes 1
JAFREY d_runtime 0
JAFREY d_verbose 0
JAFREY dump_dev
JAFREY enable_audit ON
JAFREY ewa0_loop_count 3e8
JAFREY ewa0_loop_inc a
JAFREY ewa0_loop_patt ffffffff
JAFREY ewa0_loop_size 2e
JAFREY ewa0_lp_msg_node 1
JAFREY ewa0_mode AUI
JAFREY exdep_data 5555555555555555
JAFREY exdep_location 0
JAFREY exdep_size 0
JAFREY exdep_space pmem
JAFREY exdep_type 3
JAFREY fru_table ON
JAFREY full_powerup_diags ON
JAFREY graphics_background 4
JAFREY graphics_foreground 7
JAFREY graphics_page 0
JAFREY graphics_switch -1
JAFREY graphics_sync 0
JAFREY graphics_type VIDEO
JAFREY kbd_hardware_type PCXAL
JAFREY language 36
JAFREY language_name English (American)
JAFREY license MU
JAFREY memory_test full
JAFREY ocp_text Jafrey - notinNH
JAFREY os_type OpenVMS
JAFREY pal OpenVMS PALcode V1.19-7, Digital UNIX PALcode V1.21-19
JAFREY pci_arbmode Round-Robin
JAFREY pci_parity ON
JAFREY pci_req64
JAFREY pka0_disconnect 1
JAFREY pka0_fast 1
JAFREY pka0_host_id 7
JAFREY pkb0_disconnect 1
JAFREY pkb0_fast 1
JAFREY pkb0_host_id 7
JAFREY prompt >>>
JAFREY rcm_answer
JAFREY rcm_dialout
JAFREY rcm_init
JAFREY reset_boot_arg0 0
JAFREY reset_boot_arg1
JAFREY reset_boot_arg2
JAFREY sys_model_num 4X00
JAFREY sys_serial_num
JAFREY sys_type PEDESTAL
JAFREY tga_sync_green 8
JAFREY tt_allow_login 1
JAFREY tta0_page 0
JAFREY tta0_type VIDEO
JAFREY tty_dev 0
JAFREY version V4.8-7, 2-MAY-1997 11:27:33
JAFREY P00>>>
|