| Title: | AlphaServer 4100 |
| Moderator: | MOVMON::DAVIS S |
| Created: | Tue Apr 16 1996 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 648 |
| Total number of notes: | 3158 |
Hi,
I want to install raid controller kzpsc-xb on alphaserver 4100.
the installation is ok. But, I find I can't set the channel speed
to 20 MHZ using utility swxcrmgr. I am using RCU 3.3 and
six rz29-rw disks.
Please give me some advice !
Thanks in advance !
Wilson Lu
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 585.1 | KZPSC-XB is Fast(10MBytes/sec) Wide 16Bit data transfers | KEIKI::WHITE | MIN(2�,FWIW) | Mon May 05 1997 23:26 | 6 |
You cannot run a FAST10 controller at Ultra SCSI speeds.
Bill
PS - What is a RZ29-rw?
| |||||
| 585.2 | POBOXB::BAK | Tue May 06 1997 17:01 | 11 | ||
Hi, The KZPAC is capable of talking to UltraSCSI disks on the backside of the controller IF you have an UltraSCSI infrastructure. This means you need the Ultra BA356 with 180w power supply and DOC based personality module. The parts are currently not available. The release notes shipped with the KZPAC will document the changes you need to make to set the speed as well as the minimum hardware requirements. Dennis | |||||