| Hi Rich,
I don't think there was a hardware switch, but there is an SRM enviroment
variable that the driver would check. Here's a blurb from the
AlphaStation 200 Service Guide:
tga_sync_green This variable is used to control the composite video signal
for monitors on the ZLXp controller that cannot detect the
presence of composite video or v/h signals. The possible
values are:
1 - Composite video for first ZLXp.
2 - Composite video for second ZLXp.
3 - Composite video for first and second ZLXp.
Cheers,
Terry
|
|
The Synch-on-Green is an Environment variable, and only under SRM.
There is a switch setting on the ZLXp-E1 module that can force-select
synch-on-green, but NT cannot switch the console between the bootstrap
console display *and* the run-time displays. (ie: one gets garbage
during the bootstrap, until NT is up and running. These systems must
be set to auto-boot, as the AlphaBIOS/ARC lacks support for a serial
console and for the TGA_SYNC_GREEN environment variable.)
See WRKSYS::ALPHASTATION 41.13, 41.21, and 41.23, etc.
|