T.R | Title | User | Personal Name | Date | Lines |
---|
832.1 | sweden reelin' | SCOMAN::WOOLDRIDGE | Worm fishermen have stiffer rods | Thu Aug 04 1988 14:55 | 3 |
| YO Bandit,
ABU GARCIA, there IS no substitute.
NIGHTCRAWLER~~~~~~~~
|
832.2 | Right On, Worm | BOSHOG::VARLEY | | Thu Aug 04 1988 15:32 | 8 |
| YO WORM:
I totally agree! I own 5500c's, 2500 c's and some 521's. I just
wanted something faster than 4.7 to 1, and based on Steelhead
experience with their spinning reels, Shimano is a great product.
By the way, do flashlights give you heart attacks?
The Bandit
|
832.3 | shimano is the choice | MDVAX1::DPROSE | | Thu Aug 04 1988 16:07 | 10 |
| I tournament fish several times a year and I fish apro
a year. The point is My Shimano equipment is always my first choice.
My partner used DAIWA but no more!!!!!!
Lunker Luck,
Dennis
|
832.4 | by MITCHELL Bandit! | STRATA::WOOLDRIDGE | Worm fishermen have stiffer rods | Thu Aug 04 1988 16:14 | 13 |
| You be on track now bro....
I've got a vintage 6500c (5:1 I think),
a lite plus, a 1022 plus, and a 521 plus. I like them all however
the lite plus is a pain if you want to remove the spool. Removing
the screws is a pain. But I guess you get what you pay for. If
it's spinning you are talking about the mitchell pro series is great.
5.5;1 I have had my old mitchell 300's for 15 years and they are
still crankin'. Good reel and my personal choice for spinning reels.
FLASHLIGHTS.....AHHHHHHH.....I HATE IT WHEN THAT HAPPENS! Good luck
with the steelies, I'd like to try it sometime. I hear they fight
like Mike Tyson.
NIGHTCRAWLER~~~~~~~~~
|
832.5 | POOH POOH PRODUCTS | STRATA::WOOLDRIDGE | Worm fishermen have stiffer rods | Thu Aug 04 1988 16:17 | 4 |
| YO,
Oh one more thing. Diawa is short for diarreah. Yuk. Steer clear
here!
NIGHTCRAWLER~~~~~~~~~
|
832.6 | Will I ever use this Ma license? | CGVAX2::HAGERTY | Jack Hagerty KI1X | Thu Aug 04 1988 16:49 | 6 |
| You write one crumy note and you get '5' replies already the same
day. I ask if the water level had improved at the biq Q (in Ma)
and no one knows nothing.
Dont poeple in Mass fish if its either too hot or too cold? I know
they dont in the rain.
Lavender Jack from NH..
|
832.7 | You must mean TBDW. He hates rain. | SCOMAN::WOOLDRIDGE | Worm fishermen have stiffer rods | Thu Aug 04 1988 17:12 | 6 |
| yo lavender,
I was in that miserable Monodnock tourney in the rain
all day eh? The best part of that day was the venison on the grill
at lunch! I don't care about no stinking rain! (the water level
is OK)
NIGHTCRAWLER~~~~~~~~~~
|
832.8 | Shimano by spin Diawa by cast | CIMNET::DSULLIVAN | | Thu Aug 04 1988 17:12 | 13 |
|
As a Shimano spinning reel lover from the pre-grafite days, I have
never really liked thier baitcasters. I recently, last year, went
to the Diawa MAGforce baitcasters. I have hardly incured a single
backlash. I think the Diawa batcaster's anti-backlash system is
far superior.
Thank God for opinions,
Bassmaster,
Dave Sullivan
|
832.9 | MOSS EVERYWHERE! | GENRAL::HUNTER | from SUNNY Colorado, Wayne | Fri Oct 14 1988 17:40 | 17 |
| Has anyone else out there experienced any problems with the
freeline levelwind on the LITE or LITE+ picking up the line correctly?
I have been having problems with my LITE+ picking up the levelwind
correctly and ending up with line PILED on one side of the reel.
So, I decided that since the antenna fell on my head a couple
of weeks ago and I can't GO fishing, I would do the next best thing.
I took the reel off the rod and decided to see if they really MEANT
it when it states, "DON'T TAKE THE REEL APART ANY FURTHER!", in
the manual. So, I proceeded carefully from there. I discovered
something that might apply to others who fish with freeline levelwinds
in MOSSY lakes. There was MOSS INSIDE the levelwind mechanism fouling
the spring pin that picks up the levelwind runner as well as moss
in the rotating pins of the levelwind outer shaft rotating mechanism.
So, if you fish MOSSY lakes, watch for this one. (I kept telling
you guys that this lake is FULL OF MOSS.) Now, I know I can clean
and repair this thing myself and not have to wait for 3 weeks to
get the moss out of it.
|
832.10 | Same problem w/ABU 521 | VAX4::TOMAS | Joe | Mon Oct 17 1988 12:46 | 14 |
| Re: .9
Wayne,
I posted a note a while ago reagrding the SAME problem with my new ABU 521
reel. My line piles up on the left side of the reel. It seems that after
making a cast and engaging the reel, the free-floating line guide doesn't
catch until after 4-5 turns of the handle. In the meantime, the line piles
up on the left side of the spool.
I'll take a close look at the line guide mechanism when I strip it down this
winter. Thanks for the hint.
-HSJ-
|
832.11 | 'I Wanna Add to the GNP..." | ASABET::VARLEY | | Wed Oct 03 1990 12:31 | 22 |
| I don't know if this should go elsewhere but if so, please move it,
DonMac.
Has anyone had experience with top of the line Daiwa baitcasters ? I'm
specifically interested in the "ProCaster" series. I just got one of
the "ProCaster" spinning reels and it's great ! From what I've seen,
they look real good, and I'm a little unhappy with one of my Shimano's.
I love the 2 speed, but the other one (I think it's a "BeastMaster" -
used to retail for around $ 80 or so) is just fair. It has intermittent
handle engagement problems when I first use it. Anyway, I need a
"watch" - some "Star Wars" technology. From what I've seen, I don't
want a Quantum.
As a footnote, I purchased an All-Star IM-6 rod (my other ones are
regular All-Stars) and I'm not sure I like it. It "damps" differently -
feels a little "shivery." I think I'll stay with regular All Stars. As
a matter of fact, I think the tapers of the IM-6 "bionic blades are
nicer than the IM-6 All Stars, but the "BB's" don't feel as good to me
as the non IM-6 All Stars...
What I really need are some fish...
Consumingly,
--The Skoal Bandit
|
832.12 | I LIKE QUANTUM OVER SHIMANO | XCUSME::WATERS | The Legend of the Lakes | Wed Oct 03 1990 14:43 | 14 |
|
Bandit...my main man! Don't count the Quantum out. I have two and
love them. I'm not sure of the model number I have but it cost me
about 85 bills at Zyla's. It's got a super smooth drag and I like it
over my Shimano reels. I have the left handed retrieve also. This
allows the Legend to start Cranking that BUZZZ bait...as soon as she
touches down.
Does anyone else like those left hand retrieves?
Bandit, have you ever had a Quantum?
Legend recommends you check the out.
Legend
|
832.14 | "One Worthwhile Reply Ain't Bad..." | ASABET::VARLEY | | Wed Oct 03 1990 15:11 | 16 |
| Thanks, LEGEND for offering a SERIOUS reply... I've used a Quantum
spinning reel on Steelhead, and I liked it - I just didn't like the
looks of the baitcasters - but I could be wrong. I use left hand
retrieve spinning and fly reels, and both LH and RH baitcasters (am I
screwed up, or what ?). For some reason, I like crankin' right handed
on baitcasters, although I'll admit that with buzz baits, the quicker
you start crankin' the better. I also like a higher gear ratio, and the
top line Quantum is "only" 5:1. I dunno, maybe I need another 2 speed
Shimano. You do get more leverage when you kick it down to 4:1, but the
6:1 is nice to have for "buzzin'," Rat-l-traps, etc. It's funny - I
used to catch a few fish on "'Trap" type lures, but lately - nada
(except for the blue "G" finish 1/4 oz. one). I should probably wait
for the Fishing Show at the Centrum, talk to some guys and see what's
out there and then decide...
--The Skoal Bandit (A "Legend" only at "The Magic Lantern...")
|
832.15 | Lifetime Warrantees are the way to go | RANGER::MACINTYRE | Terminal Angler | Thu Oct 04 1990 13:56 | 17 |
| I hate to think that I agree with the Legend, but I'm a Quantum fan
myself. Love those lifetime warrantees. Send the reel off to Bucko's
with $3.50 and you'll have it back like brand new within a week or so.
Quantum's Rippin' reel has a 6.1:1 ration. Although it is not the top
of the line and can be had for only $56.99. I gather from your notes
that you may not feel comfortable dishing out that insignificant amount
of cash 8^). However, they do provide a "3 reel gift pack" which
includes the Rippin' reel, the Crankin' reel, the Pitchin' reel,
in a nice case with oil and some other toys. This is available for
$169.99!!!
donmac
PS: If you still feel like your getting too much of a bargain, you
can keep the Rippin' reel and give me the rest.
|
832.16 | I like the Abu line. | DELNI::OTA | | Thu Oct 04 1990 18:05 | 9 |
| Not me I'll take my Abu Ultra caster with its lifetime warranty over
the Quantums too. This abu casts very nicely but is a little pricier
over the quantum running about 79. However on sale at BPO you can pick
it up for about 59. The nice part is it comes with two spools that you
can change in seconds. Try that with other baitcasters. The ultra has
a flippin switch too and a gearing that 5. something which is fast
enough for me.
Brian
|
832.17 | "I Don't Care, I WANT One..." | ASABET::VARLEY | | Thu Oct 04 1990 18:24 | 11 |
| I don't wanna spend the $ if I don't HAVE to, but most of the extra
nice functions cost money (like a good warranty). I tend to take care
of stuff and use it for awhile, so I'd rather spend the bucks up front
than buy a middle of the road reel and end up buyin' a top of the line
later. Besides, it doesn't make sense to me to buy a top of the line
rod, then put a middle of the road reel on it. There may not be much of
a difference, but there IS a difference. Do I NEED "top o' the line ?"
No. Am I willin' to pay for one if it makes sense ? Yes.
--The Extremely Sick Skoal Bandit
|
832.18 | abu too | RANGER::MACINTYRE | Terminal Angler | Fri Oct 05 1990 09:56 | 9 |
| I was sticking up for Quantums in general. I also like the ABUs as
well. As a matter of fact I have 4-5 ABU baitcasters and only one
Quantum baitcaster. I had 3 Quantum QMD20 spinning reels, which I
really like, however I lost 2 overboard a couple of years ago. I also
use a Quantum QSS2 ultralght which I think is a great little reel.
Most of my rods are Quantums as well.
donmac
|
832.19 | quick change spools | RANGER::MACINTYRE | Terminal Angler | Fri Oct 05 1990 13:41 | 21 |
| I wanted to point out that many reels, not marketed as having 'quick
change' spools, actually have spools that are very easy to swap.
A few years back when 'quick change' spools on baitcasters became popular
I asked a Shimano rep at the Worcester expo if they had plans to come out
with one.
He grabbed a reel from the demo table, which was one that I owned, not
marketed as having a 'quick change' spool, spun the thumb screws, took off
side and pulled out the spool, all in a matter of seconds, and commented
something like, how much easier do you want it?
Most, if not all, of my baitcaster spools can be removed the exact same
way. And extra spools may be ordered although they are not really
'marketed'.
Personally, I have not found the need to order any extra spools.
How many folks out there actually use mulitple spools with their reels?
donmac
|
832.20 | They're usually free, so what the heck | MSDOA::CUZZONE | I'm the AAA. | Fri Oct 05 1990 14:36 | 14 |
| Don,
I have a couple baitcasters with "quick-change" spool features and have
yet to change a spool mid-day. I do however find it easier to pick
apart the nastier birdsnests by removing the spool from the reel. I'm
talking about the backlashes you get when you switch from a 1 oz to 1/4
oz lure without adjusting the magnetic brake. Or am I the only one who
does this? Or I am I the only one who will admit to this? :-)
If this were to happen while a topwater frenzy was occurring next to
the boat, I just might be grateful for the extra spool and worry about
the birdsnest later.
-SSS-
|
832.21 | READ THIS Before Changing Spools | ASABET::VARLEY | | Fri Oct 05 1990 15:34 | 10 |
| Yeah, I have an ABU with an extra spool (probably because it came free
with the reel. Good idea, but I probably used it once. BTW, if you have
a reel with centrifugal brakes (Like the Garcia 5500C, Royal Express,
etc. BE CAREFUL (!!!) when you change spools, or the phenolic brake
blocks will fall off the shaft spindle. The only reels that are
"bulletproof" to change are the "mag" type reels because the magnets
are used instead of brake blocks and don't fall off when you unscrew
the side plate. Any "mag" reel is easy to swap spools...
The Skoal Bandit
|
832.22 | I change my spools a lot | DELNI::OTA | | Mon Oct 08 1990 09:06 | 24 |
| DonMac
I have the ABU with quick change spool and found I use it a lot when
changing from open water to heavy weed or lily pad beds. I keep my
main spool lined with 12lb trilene xt green and the alternate with 17
lb xt green. I like to be able to switch to heavier line for bed
fishing. With my Abu you pop the side plate off drop the old spool and
slip in the new. Even the line guide slides down so you can thread
the new line out in seconds. It literally takes seconds to change
over.
As far as changing the magnetics, sorry Skoal I have been working very
hard to not use the magnetics or side to side adjustments at all. I
zero both out and have increased the casting distance quite a bit. I
only use the brakes under heavy wind and light lures. It was bird nest
city in the beginning, but now its great. Like the pro's say you
don't need brakes thats what the thumb is for.
Skoal, on your abu did you notice there are extra holes on the side
plate that the magnets rest in? Have you tried moving them around? I
haven't I was just curiious if you knew what they are for.
Brian
|
832.23 | | ASABET::VARLEY | | Mon Oct 08 1990 10:51 | 15 |
| Yeah, if you set all your adjustments to "zero," you will get better
distance. Most of the time I do it too. On my old Garcias with
centrifugal brakes, I used to take the brake blocks off completely.
Takes practice, but casting improves.
What I was really talking about is that any reel using mags is easy
and safe to change spools on. No parts to fall off - and it doesn't
matter if it's Abu, Shimano, Daiwa - whatever. As far as the "holes"
and moving the mags around, don't do it unless you talk to the company
first to find out if it's o.k. As long as your reel works o.k., why
mess around ? What do you think you can improve that the manufacturer
hasn't already worked out ? Generally, if I don't see somethin'
described in the instructions that come with the reel, I leave it
alone...
--The (All Thumbs) Skoal Bandit
|
832.24 | what are ball bearings in a baitcaster used for? | DELNI::OTA | | Mon Dec 10 1990 09:45 | 8 |
| Can anyone explain to me how the ball bearings are placed in a
baitcaster and why its such a big deal? In looking at my reels my
Shimano has two my abu has two, but my brothers shimano beastmaster has
five. How are these bearings placed in a reel?
Just a curiousity question.
Brian
|
832.25 | Here's my thoughts $.02 | SOFBAS::SULLIVAN | | Mon Dec 17 1990 15:52 | 22 |
|
Brian,
You never stop amazing me with your questions. If it wern't for this
notesfile you'd still be using your closed faced zebco 6lb test with
mepps spinner w/rooster tail attached.
Now to answer your question. It's like everthing thing else more is
better at least they'll tell you that. Each reel is built for a
different application. You'll find most of your cranking reels will
have more bearings than a pitch'n reel because your constantly
retriving. It also depends on the reels gear ratio. If you buy a reel
with 2 bearing and a flipping switch, it won't last very long cranking
20+ rattle traps.
"Bassmaster"
Who does not yet have a degree as a rocket scientist and hopes he won't
need it to write in this file or fish.
|
832.26 | look at the diagram | RANGER::MACINTYRE | Terminal Angler | Mon Dec 17 1990 16:31 | 8 |
| Brain, look at the parts diagram that came with your reel to see
exactly where they live. Ballbearings will make the reel 'smoother'
to operate. 5 ball bearings will distribute the work more than 2 ball
bearings so the real should be smoother and the bearings should last
longer - and stainless steel ball bearings will last longer than
graphite.
donmac - a s/w engineer who doesn't do h/w but can offer an opinion
|
832.27 | Abu, Penn, or Shimano 2 speeds? | SMURF::AMBER | | Thu Feb 28 1991 12:07 | 9 |
| I'm looking for comments on the 2 speed reels. Both Abu and Penn make
automatic 2 speeds. They claim you can adjust the automatic shift
point. Shimano is apparently the only manual shift 2 speed. The
manual shift seems better to me (and Cabellas has em on sale), but I
thought I'd ask opinions here before I order.
Does anyone use an Abu or Penn autoshift 2 speed and if so, how do you
like it? Can you manually force speed changes? Etc.
|
832.28 | "Just Buy The Shimano..." | ASABET::VARLEY | | Fri Mar 01 1991 13:37 | 5 |
| I talked to the ABU rep., and he wasn't very convincing. I wouldn't
buy any PENN freshwater stuff - pretty low tech, and not that great. I
really like my SHIMANO 2-speed, and I highly recommend it.
--The Skoal Bandit
|
832.29 | I go with Shimano | DELNI::OTA | | Mon Mar 04 1991 08:43 | 9 |
| I have both an Abu and a Shimano and have to admit I would not buy
another Abu unless I go a classic. Although the Abu has a great
warranty and the quick spool shift, its clunky. No other way to
describe it, the profile on the Abu's is much bigger than the
shimano's. With the Shimano you can comfortably palm the reel when
retrieving, with the Abu its just too big. I suppose if you have big
hands the Abu might be ok, but for me its too big.
Brian
|