| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 171.1 | | HAZEL::YELINEK | WITHIN 10 | Wed Sep 28 1988 14:12 | 11 |
|
There is a Yamaha dealer in Seabrook N.H. (Driscolls Marine)..
roughly the corner of Rt. 107 (off I-95) and Rt. 1. Give them
a shout Ben!
/MArk
|
| 171.2 | | BAGELS::DILSWORTH | Keith Dilsworth DTN 226-5566 | Wed Sep 28 1988 15:08 | 3 |
| There is MacCallum's Boat House in Northwood. 603-736-4750
keith
|
| 171.3 | A good dealer! | TNPUBS::BDAY | Dinsdale ... Dinsdale! | Mon Apr 27 1992 11:27 | 10 |
| re -.1
But you didn't say how good they are!
I odered an oil bleeder screw for my Yamaha 50 from MacCallums' on the
14th and just called this morning to check the status. Pete told me it
was on back order but that he would call Wisconsin and get back to me.
(Yeah, sure.) Well, he did! Within 5 minutes. The part is on rush order
and will be in the shop this week! He apologized for the delay.
I'm impressed with that kind of service and courtesy! /ben
|
| 171.4 | the rest of the story | TNPUBS::BDAY | Dinsdale ... Dinsdale! | Mon May 23 1994 07:42 | 14 |
| Not having had the boat in the water for two years, I never tried the
oil bleeder screw mentioned in the previous reply. Well, yesterday I
tried it and it doesn't fit. I called MacCallums, spoke to Donald, he
said I had to bring in the motor but not until the end of June since
they have to service their storage customers!
Sigh ....
Any OTHER Yamaha dealers around? Driscolls in Seabrook doesn't seem to
be listed. Clemens in Brunswick has gone belly-up. BTW, who is the guy
who used to be active in these notes, took the package and is now
working at a boat/marine dealer on 101A. I seem to remember someone
saying he made house calls. /ben
|
| 171.5 | baert | SMURF::AMATO | Joe Amato | Mon May 23 1994 09:41 | 5 |
| Baert Marine in Seabrook NH is a yamaha dealer. I think Driscoll's
went belly up a few years back. As for the guy who left, that's Rick
Wilson. He's in the milord book, not too mention there's plenty of
references to/for him here.
|
| 171.6 | | MKOTS3::RONEY | | Mon May 23 1994 14:27 | 9 |
|
Rick Wilson lives in Milford, N.H. He is a neighbor! Phone
#603-673-3840.
He's a "GREAT GUY"!!!!
Bob
|
| 171.7 | | MKOTS3::RONEY | | Mon May 23 1994 14:30 | 8 |
|
Point of information. There is a dealer in Billerica, Mass. right off
of rte.3 two exits south of rte. 495. Billerica Yamaha (a.k.a. Center
Harbor Marine) phone #508-667-1518.
Bob
|
| 171.8 | Many thanks. Got a screw in Billerica today! | TNPUBS::BDAY | Dinsdale ... Dinsdale! | Mon May 23 1994 20:22 | 10 |
| Wow! Thanks for the numerous, quick replies!
I found the Billerica dealer and, eureka (you don't smell so good
either), they had the oil flow adjustment screw in stock!!! Now to find
my owner's manual. And thanks for Rick's number -- saved me looking
through a bunch of earlier notes.
The Lyman has been in dry dock for two seasons and I can't wait to
launch her again (South Bristol, Maine) and try to make it past Cutler
this time. Thanks again /ben
|
| 171.9 | Rick saves the Day | TNPUBS::BDAY | Dinsdale ... Dinsdale! | Thu May 26 1994 18:48 | 9 |
| Confirm the multiple opinions that Rick is a great guy! He also know a
bit about boats and motors! Showed me some photos of his collection.
Wow!
Turns out the carbs on the Yamaha need to be rebuilt so I've ordered
the kit and Rick will help again when it arrives.
I would highly recommend Rick if anybody is looking for an expert
outboard marine mechanic. /ben
|
| 171.10 | "Hello" from Rick | TNPUBS::BDAY | | Tue Oct 11 1994 07:54 | 9 |
| Rick Wilson asked me to say "Hello" to everyone in this notesfile. He
winterized my 50 Yamaha yesterday. He didn't get to do as much boating
as he wanted this summer and only got the FeatherCraft in once but
hopes to again before the cold weather. He's been on his Dad's
Thompson (about the same boat as my Lyman) recently and will be
winterizing that soon. He's still at Peter's Nissan and reports that
the 300Z is approaching end-of-life ... so get yours now!
/ben
|