[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | FDDI - The Next Generation |
|
| Moderator: | NETCAD::STEFANI |
|
| Created: | Thu Apr 27 1989 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 2259 |
| Total number of notes: | 8590 |
1958.0. "ftap:cannot add to the cam" by CSC32::PITT () Mon Feb 19 1996 21:53
D_Unix 3.0B.
fta0: cannot add to the cam errors in UERF.
Any ideas?? This one isn't listed in the book (at least not the only
book I have (2.0)
Thanks!
uerf -R output
uerf version 4.2-011 (122)
********************************* ENTRY 1. *********************************
----- EVENT INFORMATION -----
EVENT CLASS OPERATIONAL EVENT
OS EVENT TYPE 300. SYSTEM STARTUP
SEQUENCE NUMBER 0.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Sat Feb 17 01:07:59 1996
OCCURRED ON SYSTEM inferno
SYSTEM ID x00000011
SYSTYPE x00000000
MESSAGE PCXAL keyboard, language English
_(American)
Alpha boot: available memory from
_0x7d8000 to 0x7f66000
DEC OSF/1 V3.0B (Rev. 358.78); Sat
_Feb 17 00:44:01 PST 1996
physical memory = 128.00 megabytes.
available memory = 115.67 megabytes.
using 484 buffers containing 3.78
_megabytes of memory
AlphaServer 1000 4/200
Firmware revision: 3.0
PALcode: OSF version 1.35
pci0 at nexus
psiop0 at pci0 slot 6
Loading SIOP: script 4055db00, reg
_81000000, data 40565aa8
scsi0 at psiop0
rz0 at scsi0 (DEC RZ28 (C) DEC
_D41C)
rz1 at scsi0 (SEAGATE ST15150N
_0017)
rz2 at scsi0 (SEAGATE ST15150N
_0017)
rz4 at scsi0 (DEC RRD43 (C) DEC
_1084)
rz5 at scsi0 (QUANTUM XP34301
_1051)
tz3 at scsi0 (DEC TLZ07 (C)DEC
_4BE0)
eisa0 at pci0
ace0 at eisa0
ace1 at eisa0
lp0 at eisa0
fdi0 at eisa0
fd0 at fdi0 unit 0
vga0 at eisa0
640x480 (VGA )
>>>>>>>>>>>> fta0 DEC DEFEA FDDI Module, Hardware
>>>>>>>>>>>> _revision 2
>>>>>>>>>>>> fta0 at eisa0
>>>>>>>>>>>> fta0: DEC DEFEA (PDQ) FDDI Interface,
_Hardware address: 08-00-2B-B7-4E-12
>>>>>>>>>>>> fta0: Firmware rev: 2.46
fta0: DMA Available.
tu0: DECchip 21040-AA: Revision: 2.3
tu0 at pci0
tu0: DEC TULIP Ethernet Interface,
_hardware address: 08-00-2B-E4-18-CE
tu0: selecting 10BaseT port
pnvram0: Module Revision 16, Cache
_size: 8387584
pnvram0 at pci0
pnvram_ssn: NO System Serial Number
presto: NVRAM tested readonly ok
presto: initializing 8387584 bytes of
_NVRAM at 0x88000400
presto: primary battery ok
gpc0 at eisa0
>>>>>>>>> Timeout in command response.
>>>>>>>>> fta0: Can not add to the CAM.
>>>>>>>>> Completion Status (1) : Failure.
dli: configured
SuperLAT. Copyright 1993 Meridian
_Technology Corp. All rights
_reserved.
| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 1958.1 | | NETCAD::STEFANI | I *CAN* drive 65! | Mon Feb 19 1996 22:19 | 8 |
| >>fta0: cannot add to the cam errors in UERF.
The "CAM" is the content addressable memory. It's where we keep the
multicast and unicast addresses that are used in packet filtering.
I'm not sure why the CAM couldn't get updated.
/l
|