[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | FDDI - The Next Generation |
|
| Moderator: | NETCAD::STEFANI |
|
| Created: | Thu Apr 27 1989 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 2259 |
| Total number of notes: | 8590 |
1885.0. "demfa FATAL HARDWARE INTERNAL ERROR on AXP VMS V6.2" by IAMOSI::LEUNG (Dennis Leung, Sydney CSC) Wed Nov 29 1995 23:31
Cluster of 2 AXP 8400, SYD1 and SYD2
AXP VMS V6.2
Intermittently, all lat users get logged out and at the same time thers is a
decnet line synchronization. Problem happens only on SYD2. SYD2 does NOT crash
and users can log back in immediately afterwards.
SYD1 is fine. customer says that there is more load on SYD2 than SYD1.
DEMFA has been replaced on Tuesday night on SYD2 and we are waiting to see if
problem happens again.
Problem may be similar to note 1541 and 1789.
Thanks
Dennis
******************************* ENTRY 851. *******************************
ERROR SEQUENCE 1043. LOGGED ON: CPU_TYPE 00000005
DATE/TIME 17-NOV-1995 15:12:01.74 SYS_TYPE 0000000C
SYSTEM UPTIME: 5 DAYS 22:30:56
SCS NODE: SYD2 OpenVMS AXP V6.2
HW_MODEL: 0000044B Hardware Model = 1099.
DEVICE ATTENTION AlphaServer 8400 Model 5/300
DEMFA SUB-SYSTEM, SYD2$FXA0:
ERROR TYPE CODE #8., ERROR SUBTYPE CODE #35.
XDEV REG 05200823
DEVICE TYPE = 0823(X)
FIRMWARE REV = 20(X)
HARDWARE REV = 05(X)
PORT STATUS REG 000F200D
HALTED STATE
LED STATE = 04(X)
FATAL HARDWARE INTERNAL ERROR
FDDI RING AVAILABLE
XPUD REG 80000018
RESET COUNT 0000
FIRMWARE REV 20
ERROR REASON 03
TIME STAMP 01B60000C900
14. HRS, 17. MINS, 36. SECS
WRITE COUNT 0007
MSGID 00000203
USRDEF0 01200000
USRDEF1 00000008
USRDEF2 00000001
PARICR 00000000
PMCCSR0 22002003
REM ENABLE
REM FREEZE
RMC DISCARD XMT-WRITE TRANSAC.
MEMORY MANAGEMENT ENABLE
PMCCSR1 02587F00
PMCCSR2 01200000
MASK AM DEST PKT DISC INTRRPT
MASK HOST DEST PKT DISC INTRPT
PMCCSR3 00000000
ESP ERROR REG 00000008
RECEIVE FORMAT ERROR
XBE 0000004A
XFADR 0AE42520
XFAER 7801FFFF
XPUD REG 80000018
SELF-TEST COMPLETE
NORMAL MODE
NO FRU FAILURE
GPCSR 00000400
CLEAR OWNERSHIP ENABLED
INTCSR1 00000000
INTCSR2 00000400
AMIR 00000001
ESP ERR REG BITS ARE SET
VBR 00200000
CAAR 0000000C
CACR 00000001
DFC 00000007
SFC 00000007
UCB$L_ERTCNT 00010005
5. RETRIES REMAINING
UCB$L_ERTMAX 00000007
7. RETRIES ALLOWABLE
UCB$L_CHAR 0C442000
NETWORK
AVAILABLE
ERROR LOGGING
CAPABLE OF INPUT
CAPABLE OF OUTPUT
UCB$L_STS 00002010
ONLINE
UCB$L_ERRCNT 00000003
3. ERRORS THIS UNIT
Error log on another occurence of problem :
******************************* ENTRY 1307. *******************************
ERROR SEQUENCE 1378. LOGGED ON: CPU_TYPE 00000005
DATE/TIME 28-NOV-1995 12:52:15.66 SYS_TYPE 0000000C
SYSTEM UPTIME: 7 DAYS 16:06:33
SCS NODE: SYD2 OpenVMS AXP V6.2
HW_MODEL: 0000044B Hardware Model = 1099.
DEVICE ATTENTION AlphaServer 8400 Model 5/300
DEMFA SUB-SYSTEM, SYD2$FXA0:
ERROR TYPE CODE #8., ERROR SUBTYPE CODE #35.
XDEV REG 05200823
DEVICE TYPE = 0823(X)
FIRMWARE REV = 20(X)
HARDWARE REV = 05(X)
PORT STATUS REG 000F2005
HALTED STATE
LED STATE = 04(X)
FATAL HARDWARE INTERNAL ERROR
XPUD REG 80000018
RESET COUNT 0000
FIRMWARE REV 20
ERROR REASON 05
TIME STAMP 00F000004700
5. HRS, 2. MINS, 56. SECS
WRITE COUNT 000A
MSGID 0000F015
USRDEF0 AX 00000000
0. RETRIES ALLOWABLE
UCB$L_CHAR 0C442000
NETWORK
AVAILABLE
ERROR LOGGING
CAPABLE OF INPUT
CAPABLE OF OUTPUT
UCB ONLINE
UCB$L_ERRCNT 00000006
6. ERRORS THIS UNIT
| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 1885.1 | | IAMOSI::LEUNG | Dennis Leung, Sydney CSC | Wed Nov 29 1995 23:36 | 10 |
| forgot to add image ident. of fxdriver :
image name: "SYS$FXDRIVER"
image file identification: "X-3"
image file build identification: "X61Q-SSB-0000"
link date/time: 4-MAY-1995 23:00:03.89
linker identification: "A11-12"
Dennis
|
| 1885.2 | | STAR::STOCKDALE | | Fri Dec 01 1995 13:07 | 3 |
| Downgrading the DEMFA firmware to 1.4 should cure the problem.
- Dick
|
| 1885.3 | DEMFA firmware downgraded to V1.4 | IAMOSI::LEUNG | Dennis Leung, Sydney CSC | Tue Dec 05 1995 18:03 | 10 |
| Re : .2
We have downgraded the firmware of the DEMFA on SYD2 to V1.4 last Friday and
will monitor.
Found out that system SYD1 DEMFA's firmware has been V1.4 all along and that's
probably why the problem has not happened on it.
Thanks
Dennis
|