| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 1716.1 | | NPSS::JOHNSON | Mike J., Network Products Support | Wed Jun 14 1995 09:18 | 11 |
| This may be similar......
I recently discovered that I was unable to install the latest DEFEB firmware
on a bridge that I had previously updated numerous times without any problems.
What was different was that I had replaced the ethernet adapters in by
VAX-6000's with FDDI adapaters. Like you, I could SEE and INTEROGATE the
remote device, but I couldn't UPDATE it. The short term fix was to run NDU
from another system with an Ethernet adapter. The long term fix was to replace
NDU with the current version of NDUplus.
/mj
|
| 1716.2 | | CSC32::B_GRUBBS | | Wed Jun 14 1995 13:05 | 7 |
|
thanks for the tip, Mike. We'll give both a try.
DECnduplus for ultrix.....the only version I could scare up was 1.0?
--bert
|
| 1716.3 | | NPSS::JOHNSON | Mike J., Network Products Support | Wed Jun 14 1995 20:06 | 6 |
| Bert,
My experience has only been with the VMS version, but assuming there is SOME
similarity, NDU V3 was replaced by NDUplus, V1.0
/mj
|
| 1716.4 | that did the trick | CSC32::B_GRUBBS | | Wed Jul 05 1995 13:40 | 9 |
|
just an update.....DECndu+ v1.0 for ultrix, and NOT using the -n
switch on the decnsup command to load the DEFCN worked great.
thanks for all the help!
--Bert Grubbs
Colorado CSC
|