| Title: | FDDI - The Next Generation |
| Moderator: | NETCAD::STEFANI |
| Created: | Thu Apr 27 1989 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 2259 |
| Total number of notes: | 8590 |
May someone help me with a stranger (or may be my fault) situation??
I'm made a network copy of driver to DEFPA, did a PKUNZIP, put a volume
label (DISK 1), but when I tried to install from Windows NT Network
configuration , a got the following message:
Insert the disk labeled "disk 1" on drive A:
Can someone tell me where I'm wrong, I'm not a Windows NT expertise.
Thanks in advanced.
Marco Arronque
NIS - Brazil
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1708.1 | DEFPA NT driver installation steps | NETCAD::STEFANI | Welcome to the Revolution! | Tue Jun 06 1995 13:19 | 29 |
>>Can someone tell me where I'm wrong, I'm not a Windows NT expertise.
-------------------------------
That's OK. We all need to start someplace.
Here are the steps:
1. Pull down the latest DEFPA driver kit (FPKIT241.ZIP) from
KALI::PCDRIVERS:[DEFPA.INTERIM]FPKIT241.ZIP.
2. Enter "PKUNZIP -d FPKIT241.ZIP A:\" to extract the files and
subdirectories to a *BLANK* formatted floppy.
3. Under Control Panel/Network Settings make sure that you don't
have any FDDI PCI adapters listed as being installed.
4. Select "Add Adapter", then scroll down to the bottom and
select "Other...".
5. Pop in the floppy from Step 2, then press Enter.
6. Accept the default settings, follow the remaining steps
and reboot when prompted.
"disk 1" is actually a file that is needed and can be found in the top
level directory of the FPKIT241.ZIP kit. The actual diskette label or
volume label is not important.
- Larry
| |||||