| Title: | FDDI - The Next Generation |
| Moderator: | NETCAD::STEFANI |
| Created: | Thu Apr 27 1989 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 2259 |
| Total number of notes: | 8590 |
I am currently responding to an RFP where the customer is looking to
install 4 FDDI rings to cover a large steel plant. They are proposing
to connect each ring at two points. Each connection will be dual
attached to both rings which will provide redundancy between rings. If
one FDDI Backbone Router goes down the other connection will maintain a
connection to the other rings.
Do you see anything wrong with this configuration, or do you have
suggestions for improvement?(Sorry for the limited detail! You can call
me and discuss this further.)
They are also requesting that we provide optical by-pass switches in
front of both A & B ports of the FDDI Routers. I need a recommendation
and contact for a manufacturer who can provide this technology. Also,
I need to know if Digital is currently supporting these devices on a
maintanence contract.
I need this info ASAP to meet a very aggressive timeframe. Thanks in
advance!
You can call me at DTN-431-2901
WK
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1706.1 | NETCAD::STEFANI | Welcome to the Revolution! | Tue Jun 06 1995 07:14 | 13 | |
>>They are also requesting that we provide optical by-pass switches in
>>front of both A & B ports of the FDDI Routers. I need a recommendation
>>and contact for a manufacturer who can provide this technology. Also,
>>I need to know if Digital is currently supporting these devices on a
>>maintanence contract.
The only company I know of that makes FDDI OBR's is AMP. You may also
want to check your DECconcentrator 900MX or DECnis documentation to see
if they mention specific part numbers. Further, you may want to check
with the Open DECconnect folks to see if they have an approved vendor
for OBR's.
/l
| |||||
| 1706.2 | OBR # & Price | GRANPA::DFAUST | Bad Things, man... | Tue Jun 13 1995 10:18 | 8 |
I contacted AMP (as I had a need for OBR information as well) at
1800/522-6752 and got information from them on their line of FDDI Dual
Bypass Switch Module Assemblies, and they have a bunch of them. The
one's I am looking at are AMP part # 501916-3, at a cost of $650 per
unit, with quantity discounts available.
Dennis Faust
| |||||
| 1706.3 | Support for OBR... | ADOV01::MANUEL | Over the Horizon.... | Wed Jun 14 1995 09:12 | 6 |
You need to ensure that the concentrators and the FDDI adapters you use
have a connection to drive the OBR, most of our DAS adapters do have
this connection and I think that the DECconcentrator 500 does also.
Regards,
Steve.
| |||||