[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference 7.286::fddi

Title:	FDDI - The Next Generation

Moderator:	NETCAD::STEFANI

Created:	Thu Apr 27 1989
Last Modified:	Thu Jun 05 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	2259
Total number of notes:	8590

1698.0. "How to set IP address on a DC500 V3.4" by CX3PST::NOTAMI::A_ANDERSON (CX03 2/H13 NSU/VAX MacGhille Aindrais) Fri May 26 1995 19:00

Hello all,

I have a customer with a DEC concentrator 500 running V3.4 software.  He is
trying to set a IP address and Gateway address on the DC500.

At the Set menu he selects option 1 then enters his IP address.  It reports
an unknown erorr then goes back ot the manue.  The same thing happens when he
tries to set a Gateway Address.  It reports an unkniown error.

Are there any bugs in V3.4 that can cause this.  Or is there any thing else 
that needs to be done prior to setting this address.  




Thanks,
Alan Anderson

T.R Title User Personal
Name Date Lines

1698.1 try this NPSS::TAYLOR Tue May 30 1995 10:25 9

T.R	Title	User	Personal Name	Date	Lines
1698.1	try this	NPSS::TAYLOR		`Tue May 30 1995 10:25`	9
	Try enabling the write access function on the management card, right switch on the two switch dip on the right side of the management module, down=enabled. The left switch when enabled will reset system default parameters on power-up or restart. Set this to disabled = up if you want to keep the IP address in case the box power's up or resets.

    
    Try enabling the write access function on the management card, 
    right switch on the two switch dip on the right side of the
    management module, down=enabled. 
    
    The left switch when enabled will reset system default parameters 
    on power-up or restart. Set this to disabled = up if you want to 
    keep the IP address in case the box power's up or resets.