Conference 7.286::fddi

1477.0. "9-HardwreErr, with CSR of 00000605 after shutting decnet down" by CSC32::SCHLABS () Tue Oct 18 1994 14:59

    Hi,
    
      I am dealing with someone who is running 6.1 openvms/axp on a
    4000-610.  He has phase iv decnet and ucx v3.1 running.  If he
    does an NCP> SET EXEC STATE OFF he sees an error against FAA0,
    a UCX SHOW INTER/FULL AF0 shows 6 additional SEND hardware
    errors.  He has a duplicate system that doesn't see this problem
    He swapped the defaa's and it stays with the system (not the board).
    Any ideas what the 9-HardwreErr, with CSR of 00000605, mean??
    
    
    greg
    
    An SDA> SHOW LAN/DEV=FA shows, under counter info, the
    following:
    
    LAN Data Structures
    -------------------
               -- FAA Counters Information (cont) 18-OCT-1994 12:04:07 --
    
    Last CRC time                   None    Late collisions                   
    0
    Last CRC srcadr                 None    Last late collision            
    None
    Alignment errors                   0    Coll detect chk fail              
    0
    Frames too long                    0    Send data length err              
    0
    Rcv data length err                0    Frame size errors                 
    0
    
    Fatal error count                  1    Last fatal error     17-OCT
    09:56:29
    Restart failures                   0    Prev fatal error               
    None
    Power failures                     0    Last error CSR             
    00000605
    Transmit timeouts                  0    Fatal error code       
    9-HardwreErr
    Control timeouts                   0    Prev fatal error               
    None
    Invalid length                     0
    
    
    
    
    
    
        Press RETURN for more.
    SDA>