| Title: | FDDI - The Next Generation |
| Moderator: | NETCAD::STEFANI |
| Created: | Thu Apr 27 1989 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 2259 |
| Total number of notes: | 8590 |
Hi, I'm looking for the layout of the 9-pin D-type connector used on the STP modules used in the DEFCN and DEFEA. Upto now I couldn't find any location or manual for this. Ton
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1238.1 | STP pinout | JGODCL::LBERG | gaia is moving | Fri Feb 18 1994 06:00 | 4 |
As far as I can see pin 5 and 9 are for transmit and pin 1 and 6 for
receive according the schematics.
Lodewijk
| |||||
| 1238.2 | STP product pinouts | LEVERS::B_CRONIN | Mon Feb 21 1994 09:10 | 11 | |
There are two pinnings for the DEC STP product set, and any product
that conforms to the "Green Book" spec of May 1991.
For an M port, Transmit is on 1&6, Receive is on 5&9
For an S port, Transmit is on 5&9, Transmit is on 1&6
At the risk of stating the obvious, the M port is in the concentrator,
the S port is in the adapter.
| |||||