| Title: | FDDI - The Next Generation |
| Moderator: | NETCAD::STEFANI |
| Created: | Thu Apr 27 1989 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 2259 |
| Total number of notes: | 8590 |
hello,
I get the following entry for a defma at a customer site (configuration
is 2x 7610)
******************************* ENTRY 56.
*******************************
ERROR SEQUENCE 33. LOGGED ON: SID
17000002
DATE/TIME 8-FEB-1994 14:52:38.45 SYS_TYPE
01020001
SYSTEM UPTIME: 0 DAYS 00:38:14
SCS NODE: NIPA01 VAX/VMS
V5.5-2
DEVICE ATTENTION KA7AA-AA CPU FW REV# 2. CONSOLE FW REV# 0.2
DEMFA SUB-SYSTEM, NIPA01$FXA0:
ERROR TYPE CODE #8., ERROR SUBTYPE CODE #35.
XDEV REG 05200823
DEVICE TYPE = 0823(X)
FIRMWARE REV = 20(X)
HARDWARE REV = 05(X)
PORT STATUS REG 000F2005
HALTED STATE
LED STATE = 04(X)
FATAL HARDWARE INTERNAL ERROR
XPUD REG 80000018
RESET COUNT 0000
FIRMWARE REV 20
ERROR REASON 05
TIME STAMP 000500008300
9. HRS, 18. MINS, 56. SECS
WRITE COUNT 0005
MSGID 0000F015
USRDEF0 00000004
USRDEF1 00000001
USRDEF2 00000000
PARICR 00000000
PMCCSR0 22002003
REM ENABLE
REM FREEZE
RMC DISCARD XMT-WRITE TRANSAC.
MEMORY MANAGEMENT ENABLE
PMCCSR1 84DE0000
PMCCSR2 01200080
AM DESTINED PKT DISCARDED
MASK AM DEST PKT DISC INTRRPT
MASK HOST DEST PKT DISC INTRPT
PMCCSR3 00000000
ESP ERROR REG 00000000
XBE 000002CA
XFADR 00020100
XFAER 80000000
XPUD REG 80000018
SELF-TEST COMPLETE
NORMAL MODE
NO FRU FAILURE
GPCSR 00000400
CLEAR OWNERSHIP ENABLED
INTCSR1 00300000
IPE-FDDI RMC CHIP INTRPT PEND
IPF-FDDI MAC CHIP INTRPT PEND
INTCSR2 00000400
V A X / V M S SYSTEM ERROR REPORT COMPILED 8-FEB-1994
16:03:54
PAGE 29.
AMIR 00000000
VBR 00200000
CAAR 0000000C
CACR 00000001
DFC 00000007
SFC 00000007
UCB$B_ERTCNT 20
32. RETRIES REMAINING
UCB$B_ERTMAX 05
5. RETRIES ALLOWABLE
UCB$L_CHAR 0C442000
NETWORK
AVAILABLE
ERROR LOGGING
CAPABLE OF INPUT
CAPABLE OF OUTPUT
UCB$W_STS 2010
ONLINE
UCB$W_ERRCNT 0001
1. ERRORS THIS UNIT
Any idea?
Thanks,
Claude
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1229.1 | -->> 908.* | HOO78C::RIETKERK | Bart Rietkerk-Hoogeveen-Holland | Mon Feb 14 1994 04:10 | 5 |
Hello,
This is being discussed in 908.* of this notesfile.
Bart.
| |||||
| 1229.2 | Show us yours we show you ours | HLFS00::EITENS_S | Sieds Eitens MCS Hoogeveen Holland | Tue Feb 15 1994 04:18 | 9 |
Claude,
Just outof interrest could you post the complete configuration from
those machine's. Because we have the same problem on a 6420 witch is
very loaded configuration so what we suspect is an overload on the XMI
but that's only a guess.
Regards Sieds Eitens
MCS Hoogeveen Holland.
| |||||
| 1229.3 | It might be the FXDRIVER | HLFS00::EITENS_S | Sieds Eitens MCS Hoogeveen Holland | Wed Feb 16 1994 03:51 | 17 |
Claude,
We got incontact with somebody who had seen the same problem as what we
are having at our sites, and he cameup with the solution wich solved
the problem at his site. At this site he has upgraded the FXDRIVER to
id X-22 and that is running fine for a period of time so at this moment
he feels very sure about it that the problem is solved.
So my question to you could you look at your site witch id version
FXDRIVER is installed. At this moment i cann't find if there is a patch
kit for it but someone at SSO should be able to help us out i guess.
The FXDRIVER with id X-22 should be in the latests version of VMS
5.5-2.
So looking forward to your answer and hope that you can solve this
problem with this info.
regards Sieds Eitens
MCS Hoogeveen Holland.
| |||||