| Title: | FDDI - The Next Generation |
| Moderator: | NETCAD::STEFANI |
| Created: | Thu Apr 27 1989 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 2259 |
| Total number of notes: | 8590 |
I am trying to find out where I can obtain a copy (over the easynet) of
the release notes for version 1.0, 1.0b and 1.1 of the firmware for a
DEFZA.
regards
jimk
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1079.1 | I recommend that you contact the support person | SCHOOL::WASHABAUGH | Born to be Mild | Sat Sep 04 1993 17:16 | 7 |
Maurene Jean, DTN: 247-2375 I hear that she might be out for an extended amount of time, so it would be best to contact her sooner or later. The developement organization does not have the files in question. doug [FORMER defza firmware engineer] | |||||
| 1079.2 | Decoding of DEFZA register dump | NUTT::DANIEL | Fri Sep 10 1993 22:06 | 72 | |
Does anyone have the register definitions for the DEFZA?
One of the problems being researched for the customer is a register
dump when the FDDI ring hangs.
The register dump is as follows:
ID x000A
RESET COUNT x0000
TIME STAMP HI x00000005
TIME STAMP LO x06A0
WRITE COUNT x0020
INT REASON x0007
EXT REASON x8000
CMD NEXT PTR X00205E58
CMD NEXT CMD X00000000
DMA NEXT RMC PT X00200C70
DMA NEXT RMC OWN X0000FFC8
DMA NEXT HOST PTR X00200B20
DMA NEXT HOST DESCR X00000000
LMGR NEXT PTR X00201C50
LMGR NEXT DESCR X00000000
SMT NEXT PUT PTR X00201C50
SMT NEXT PUT DESCR X00000000
SMT NEXT TAKE PTR X007501DF
SMT NEXT TAKE DESCR X00000000
PM CSR X0000
INT 68K PRESENT X8006
INT 68K MASK X0B00
PORT INT EVENT X0001
PORT CNTL A XFFD9
PORT CNTL MASK XFFC8
PORT CNTL B X0000
PORT STATUS X8000
RAM ROM MAP X0000
PHY CSR XFFC8
DMA DONE XC000
DMA START LO X0903
DMA START HI X05ED
RMC CMD X0800
RMC MODE X0385
RMC RCV PAGE X3CCA
RMC RCV PARAMS X4304
RMC XMT PAGE X9038
RMT XMT PARAMS X5124
RMC INTR X0346
RMC INT MASK X1000
RMC CHAN X0761
AC RCV CNTL X0761
MAC XMT CNTL X0761
MAC INT A X0761
MAC INT B XFF6D
MAC RCV XFF61
MAC MLA B X0063
MAC MLA C X0000
MAC T REQ XFF16
MAC TVX VAL X0001
CRC X0003A1BE
There are two problems being seen at this site. The first is DEFZA's go
into receiver overrun. These systems have to be reset to clear the
problem. The second appears as first a adapter fault, then a register
dump, port halt and then ring init.
The customer has seen this problem 3 times since july 19th.
We either need to have the above register dump decoded or a pointer to
the manual that will allow us to decode them ourselves.
Thanks for any help,
Dan Soderquist Regional Product Support
| |||||