[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference 7.286::fddi

Title:	FDDI - The Next Generation

Moderator:	NETCAD::STEFANI

Created:	Thu Apr 27 1989
Last Modified:	Thu Jun 05 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	2259
Total number of notes:	8590

583.0. "DECbridge 500 vs 600 end to end question" by ANGLIN::ORTHOBER () Thu May 21 1992 18:07

	Hi All:

	I am in the middle of configuring a fiber run for
	a customer.  This is a 4 mile run that 10mbs is
	needed for clustering and single mode fiber is needed.

	I have a configuration that has a decbridge 518 at each
	end.  These are both SAS, will that work?  DOn't I need
	some sort of DAS?

	Do I have to use 618s on each end?

thanks
ort1

T.R Title User Personal
Name Date Lines

583.1 SAS-SAS is OK LEVERS::S_JACOBS Live Free and Prosper Wed May 27 1992 16:38 6

T.R	Title	User	Personal Name	Date	Lines
583.1	SAS-SAS is OK	LEVERS::S_JACOBS	Live Free and Prosper	`Wed May 27 1992 16:38`	6
	You can run a point-to-point single-fiber-pair connection between two SAS devices (s-ports). The choice of single or multiple ethernet ports depends on the requirements of the network at the two locations, and can be made independantly for each side. Steve

    You can run a point-to-point single-fiber-pair connection between two
    SAS devices (s-ports).  The choice of single or multiple ethernet ports
    depends on the requirements of the network at the two locations, and
    can be made independantly for each side.
    
    Steve