[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | FDDI - The Next Generation |
|
| Moderator: | NETCAD::STEFANI |
|
| Created: | Thu Apr 27 1989 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 2259 |
| Total number of notes: | 8590 |
567.0. "DEFCN-SA fails installation,DEFCN-AB 2.3" by HOO78C::RIETKERK (Bart Rietkerk - CS Rotterdam - Holland) Wed May 13 1992 10:50
Gentlemen,
I recently installed a DEFCN-SA in a DEFCN-AB (firmware 2.3).
The slot where it is installed in was previously occupied by a
4-port Fiber card.
After installation the DEFCN-SA doesn't pass its selftest, and the
red "module fault" led remains on.
The installation procedure doesn't mention any configuration
restrictions.
Does anyone know if
- Some hardware/software settings have to be done after replacing
a fiberboard with a STPboard?
- DECconcentrator 500 firmware 2.3 DOES in fact support a DEFCN-SA?
Naturally, I could just have a broken board, so I'll try to replace it
in the next couple of day's
TNX in advance for any hints!
Bart.
| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 567.1 | Download V3.1 firmware | QUIVER::P_SHORT | | Thu May 14 1992 10:28 | 7 |
|
Hello,
You should get a copy of V3.1 code (the latest). V2.3 does not support
6 port boards.
Pam
|
| 567.2 | TNX!! | HOO78C::RIETKERK | Bart Rietkerk - CS Rotterdam - Holland | Fri May 15 1992 08:52 | 5 |
| Thanks Pam,
For the quick reply. That answers my note completely!
Bart.
|