[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | FDDI - The Next Generation |
|
| Moderator: | NETCAD::STEFANI |
|
| Created: | Thu Apr 27 1989 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 2259 |
| Total number of notes: | 8590 |
542.0. "Help! DEFZA upgarde problem." by TKTVFS::IDO (Naoki Ido, CSC/TOKYO, EWB, DTN 680-2456) Mon Apr 20 1992 05:40
Hi,
I'm trying to upgrade DEFZAs(Rev B01 and C01) from V1.0B to V1.2 with NDU
V1.1. However, I always get the following error message.
I tried to upgrade these DEFZAs to V1.1 first but I got same error.
I changed DEFZA(Rev B01) to another DEFZA Rev C03(V1.2), the NDU then could
download same V1.2 code to the DEFZA successfuly.
I'm using NDU V1.1 SSB , ULTRIX V4.2A, two DEFZAs Rev B01 and Rev C01.
Has anyone seen this problem before?
Thank you,
Naoki
-----------------------------------------------------------------------------
# ndu -s fza0
(c) Digital Equipment Corporation. 1991. All Rights Reserved.
Name DEFZA
Firmware Rev V1.0B
# ndu -u -i -v fza0 defza120.sys
(c) Digital Equipment Corporation. 1991. All Rights Reserved.
Name DEFZA
Firmware Rev V1.0B
Do you wish to continue? (y/n) y
ndu: maximum block retries reached
pid 6191 (ndu) was killed on an unaligned access, at pc 0x4014b4
buserror(coredumped)
| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 542.1 | Fixed! | TKTVFS::IDO | Naoki Ido, CSC/TOKYO, EWB, DTN 680-2456 | Wed May 06 1992 04:40 | 7 |
| I finally found the cause of the problem and my mistake.
The error of question was "DLU error -recoverble". This caused a bad firmware
images I copied. I forgot to say -i when I copied defza120.sys from other VAX
with dcp.
sorry for this confusion,
Naoki
|